Connecting Pc(15Pin D-Sub) - Philips BDH4251V/00 User Manual

Connecting PC(15pin D-sub)

EN
Connecting PC
• This product
supports resolutions
of VGA, SVGA,
XGA, WXGA, SXGA.
• Before connecting a
PC to the PDP, be
sure to adjust the
resolution of the PC.
P.MODE PICTURE FMT AV
S.MODE S.EFFECT PIXEL SHIFT
PIP POSITION COLOR TEMP
PIP SOURCE SWAP RECALL
MENU
VOL VOL
TIMER STILL MUTE
R-48F01
25
Before Connecting to the PDP, Set the Resolution
1
of the PC.
• Go to SETUP-CONTROL PANEL-DISPLAY PROPERTIES in Window
Screen of the PC.
• Choose the SETTINGS tab in the DISPLAY menu.
• In the SETTINGS menu, select 640 x 480, 800 x 600, 1024 x 768 or 1280 x
1024
Connect the PC to the PDP.
2
• Prepare the PC cable (D-sub 15pin) and the PC audio
cable.
• Connect the PC(Output) to the PDP(Input) as shown below.
• If using the audio cable for connection, put the ferrite core to
the middle of the cable for preventing EMI.
INPUT COMPONENT INPUT AV1 AV2
HDMI PC AUDIO PC ?
OPTICAL
OUTPUT
DIGITAL
AUDIO
AUDIO
MENU
MOVE
Audio
Ferrite Core
User Manual BDH4251V/00
INPUT COMPONENT INPUT AV1
HDMI PC AUDIO PC
AUDIO
15 PIN D-sub
Output connect
AV2
ANT
SERVICE
OPTICAL
OUTPUT
DIGITAL
AUDIO