ORAVA electrical appliances are manufactured according to current state of the engineering and recognized safety-technical rules. Nevertheless, incorrect or improper use, or use contrary to designation may result in the risk of injury or endanger the life of the user or third person, damage to the device and other material values.
Page 3
• The appliance is intended for home and similar indoor use, with no special focus. • It is not a professional device for commercial use. • Do not change the technical parameters and features of the device by unauthorized modification or modification of any part of the device. •...
Page 4
• To avoid electrical shock, plug the power cables into properly grounded electrical outlets. If the device is equipped with a 3-pin power supply cord, do not use adapters that do not have a grounding element or remove the grounding element from the plug or adapter.
Page 5
2. Special Safety Instructions. Read carefully! Electrical equipment is designed and manufactured in such a way as to allow for safe operation and use by persons without a professional qualification. Despite all the me- asures taken by the manufacturer to ensure safe use, handling and use, it carries with it certain residual risks and associated potential hazards.
Page 6
Check/Commissioning • We recommend performing both initial and subsequent regular machine inspections. • Never use the appliance if it is incomplete, damaged, or any part of it has been dama- ged during use. • Do not use non-original and incomplete parts of the device and its accessories. •...
Page 7
• Do not set the audio device (and the remote control): - to places where medical devices are used. Their function may be impaired; - for unstable carts, stands or desks; - on an uneven, unstable and dirty surface; - the sealing edge of tables, tables or parts of furniture; - in the vicinity of containers with water or other liquids.
Page 8
• Disconnect the appliance from AC power while leaving children or unqualified persons near the device unattended. There is a risk of serious injury! There is a risk of electric shock! There is a danger of fire! • Do not connect the power cord and signal cables to common bundles.
Page 9
Power Supplies/Batteries • Safety instructions for the power supply of the remote control - to the batteries. Always store batteries out of reach of children. In case of battery swallowing, immedia- tely seek medical advice. Wipe the battery with a dry cloth before inserting it into the remote control. This will ensure a better electrical contact.
Power source Power supply from the mains 1 Plug one end of the power cord into the AC-IN jack on the device and connect the other end to an electrical outlet. 2 Press the button 1 (4) to turn on the device and press the FUNCTION button (5) to select the desired sound source.
Page 12
Right and left speaker REP button. (selecting repeat / normal playback mode) USB connector Power button 1 FUNC button (switch). (switching audio source) TIME/PROG button. (setting the time/selecting the program play mode) LCD display (backlit) Standby indicator u (Play/Pause) Opening the CD Cover (OPEN/CLOSE) Button x (stop) Button >...
General Operations Display The track numbers and playback status are displayed. Audio setup 1 Turn on the device. 2 Press the volume up/down button to adjust the volume. The volume is displayed on the display Using the headphones (not supplied) When the headphones are plugged into the PHONES headphone jack, the speakers will be muted and will be played through the headphones.
Radio control Basic operations 1 Switch the audio source with the FUNC switch. on the radio. Expand the TELESCOPIC ANTENNA to its maximum length and adjust its angle and direction so that the reception is as high as possible. 2 Automatic tuning In radio mode, press u.
Disk information Disk information Playable discs This unit can play Audio CDs of 8 or 12 cm diameter with the Compact Disc DIGITAL AUDIO and CD-R discs recorded in Audio CD, MP3 or WMA format. Warning! Depending on the state of the CD-R / CD-RW disc and recording on the disc, the disc may not play even if it meets all the playback conditions.
Play discs 1 Press FUNC. Switch the audio source to CD (CD player). 2 Open the CD cover by pressing the OPEN/CLOSE part. 3 Insert an audio CD into the CD compartment. Insert the disc with the label above. 4 Close the CD cover. 5 After the disc is loaded, playback starts automatically from the first track.
Compile a program This feature allows you to compose a program from multiple tracks. Tracks can only be programmed during a stop. So, if you play a disc, you need to stop playback by pressing x. 1 When the PROG./TIME button is pressed in the stop mode, the programming mode is switched on.
Page 18
Repeated playback of MP3 tracks (REPEAT ALBUM) All MP3 tracks in that folder can be played back repeatedly. If an MP3 disc is inserted, press REP. playback modes are switched as follows: REPEAT 1 (repeat 1 item) - REPEAT ALL (repeat all items) - REPEAT ALBUM (Repeat Album / Folder) - No View (Standard Playback) Play MP3 / WMA files The player enables MP3 / WMA playback in audio quality comparable to CDs.
Play from a USB device Play MP3/WMA files The player enables MP3 / WMA playback in audio quality comparable to CDs. You can play files from a USB device. You can play MP3 files using the buttons on your device. 1 Switch the audio source with the FUNC switch.
Forward: > Scroll to the next song (one press or repeatedly) and play / play it automatically. Fast backward: . Fast shift in the current track backwards (hold button pressed). When you release the button, playback continues. Fast forward: > Fast shift in the current track forwards (keep the button pressed).
Technical specifications CD player Disc Format: CD/DA - CD-R - CD-RW (MP3/WMA) Channels: 2 audio channels (stereo) Signal-to-noise ratio: more than 50 dB Distortion: below a measurable limit Sampling frequency: 44.1 kHz Quantification: 16 bit - linear / channel Sensing device: semiconductor laser Wavelength: 790 nm...
Page 22
DECLARATION OF CONFORMITY Short text Declaration of Conformity: ORAVA retail 1, a.s. hereby declares that the RCD-811 complies with the essential requirements and other relevant conditions of Directive 2014/53/ EU of the European Parliament and of the Council. The full text of the Declaration of Conformity is available at: www.orava.eu...
Need help?
Do you have a question about the RCD-811 and is the answer not in the manual?
Questions and answers