Subscribe to Our Youtube Channel
Summary of Contents for Hi-Spec DT40235
- Page 1 OWNER’S OWNER’ S MANUAL MANUAL 0-15-30W Soldering Iron Set 0-15-30W Soldering Iron Set DT40235 DT40235...
- Page 2 Owner’s Manual WARNING Read all operating instructions carefully and comply with them. Do not allow familiarity with power tools breed carelessness or contempt. It is important to understand these instructions and to acquaint yourself with the tool, its correct usage and all safety requirements. Failure to to do so may result in electric shock, fire and/or serious personal injury.
- Page 3 Owner’s Manual double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. h. Visit http://www.esfi.org for more information on electrical safety. The Electrical Safety Foundation International (ESFI) is the premier non-profit organization dedicated exclusively to promoting electrical safety at home and in the workplace.
- Page 4 Owner’s Manual drilling, and other construction activities, contain harmful chemicals. Reduce your risk of exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
- Page 5 Owner’s Manual g. The device may only be used indoors. h. Ensure that no liquids enter the device. i. Do not touch the marking tip or marking iron when the device is hot. Danger of burns! j. Use the device only in well ventilated rooms. k.
- Page 6 4. Fine Tweezers 5. 1.6m Solder Briad 6. Storage Box 7. Fold-Out Solder Stands 8. Solder Pump 9. Heat Select (15/30W) Model : DT40235 AUK/US Rated voltage: 110V-230VAC 50/60 Hz Rated power: Protection category: Double Insulated Page 5 of 6...
- Page 7 Owner’s Manual OPERATING INSTRUCTIONS CAUTION To prevent the risk of fire, always rest the device on the stand provided or on a similar non-flammable surface. Allow the tips to cool down completely before removal or exchange. Danger of burns! Always disconnect the device from the mains after finishing work. Allow the device to cool down to room temperature before you put it away.
Need help?
Do you have a question about the DT40235 and is the answer not in the manual?
Questions and answers