Advertisement
4.1.3.
While charging the battery power indicator flashes a green light (fig 2). One flashing light indicates 0-20% charge.
4.1.4.
When all five indicator lights are illuminated the battery is fully charged.
4.1.5.
When the penlight torch is fully charged disconnect from the charging source. DO NOT leave the penlight torch on charge for long
periods.
4.2.
ON/OFF SWITCH
NOTE: The ON/OFF switch acts as a multifunctional switch to control light selection.
4.2.1.
Press the ON/OFF button and the bottom spotlight will illuminate (fig 2).
4.2.2.
Press the ON/OFF button a second time and the front floodlight will illuminate (fig 2).
4.2.3.
Press the ON/OFF button a third time and the top UV light will switch on (fig 2).
4.2.4.
Press the ON/OFF button again and the penlight torch will turn off (fig 2).
4.3.
DIMMER CONTROL
NOTE: The dimmer function will only operate in the spotlight or floodlight mode.
4.3.1.
In the desired mode press and hold the ON/OFF button to dim or brighten the light setting (fig 2).
4.4.
LASER BUTTON
4.4.1.
Double press the laser button to turn the laser light on (fig 2).
4.4.2.
Single press the laser button to turn off the laser light (fig 2).
WARNING! Be aware of the orientation of the penlight torch when turning on the laser light.
‰
It is recommended that you point the laser light towards the ground when turning on.
4.5.
MAGNETIC CLIP
4.5.1.
Attach the penlight torch to a metal surface in your desired position.
4.5.2.
The penlight torch can be rotated through 120º to suit (fig 3).
5. MAINTENANCE
5.1.
After each use recharge the penlight torch.
5.2.
After charging or usage remove all cables or connections.
5.3.
Use a clean, dry cloth to wipe the penlight torch after use.
DO NOT use solvents.
8
5.4.
When not in use store the penlight torch in it's original packaging in a safe, clean, dry childproof location.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.1
01284 703534
sales@sealey.co.uk
Original Language Version
fig.2
fig.3
www.sealey.co.uk
LED450UV Issue 1 28/04/22
Advertisement
