Table of Contents
Advertisement
Quick Links
IMPORTANT!
PLEASE READ CAREFULLY.
This user manual contains important information about the BlazeCut T Series
fire suppression system, its use, operation, installation and maintenance. If
further technical information is required please request a copy of the T Series
technical manual from a BlazeCut representative.
AUTOMATIC FIRE
SUPPRESSION SYSTEM
T SERIES
USER MANUAL
Advertisement
Table of Contents
Summary of Contents for Blaze T Series
- Page 1 This user manual contains important information about the BlazeCut T Series fire suppression system, its use, operation, installation and maintenance. If further technical information is required please request a copy of the T Series technical manual from a BlazeCut representative.
-
Page 2: Package Contents
IMPORTANT! Always ventilate the area after activation. CERTIFICATION The safety and performance of the BlazeCut T Series system was confirmed by various independent bodies. Certificates or further information is available from the local BlazeCut agent or at www.blazecut.com. WARRANTY AND LIFESPAN BlazeCut offer a standard two-year warranty on all T Series models from the date of a retail purchase. -
Page 3: System Operation
SYSTEM OPERATION Designed to protect small enclosed spaces with risks of fire. Simple and easy to install, the BlazeCut T Series system operates automatically without any external power source. The extinguishing agent is stored in a tube, which also applies the extinguishing agent directly to the fire at its source. -
Page 4: Technical Specification
Measure the enclosures Width x Height x Depth in metres or feet and this will calculate your m or ft Note: the enclosure should be enclosed or have minimal vents. T series is not suitable for open areas. Then refer to the chart below to select the suitable length. - Page 5 Extinguishing agent is clean extinguishing medium, used in the BlazeCut UL Recognized and FM Approved T Series for volume fire suppression. Extinguishing effects are due to cooling and anticatalyst effect. Extinguishing agent siphons heat from fire, enters the chain chemical reaction of burning, slows this reaction and stops it.
-
Page 6: Installation Instructions
240 V and above, so that the application is immediately deenergized via the use of a T Series pressure switch model. If you have purchased a model with the pressure switch, please refer below in this User Manual or to the T Series Manual for more information about the pressure switch and its wiring. - Page 7 Place the BlazeCut T Series in the proximity of the protected enclosure where the risk of fire is greatest (in the area of engines, systems containing flammable liquids or gases, protected objects, electrical installations, connections, circuit breakers, inductors, batteries etc.).
- Page 8 Working on electrical installations may be performed only by qualified persons. Install the T Series so that the pressure switch is not exposed to aggressive chemical substances (caustic, acids, solvents, corrosive substances etc.) and in direct influence of weather conditions.
- Page 9 During the movement of the tube, bubbles of gas in the extinguishing agent will be visible. This indicates that extinguishing agent is in the tube and the BlazeCut T Series is functional. SYSTEM PRESSURE INSPECTION It is recommended to inspect the pressure of the tube when the equipment is at operating temperature.
-
Page 10: Product Disposal
PRODUCT DISPOSAL Discharged system consists of recyclable materials. Please dispose of this product responsibly and recycle where possible. Dispose discharged system according to local waste management regulations. For proper recycling, return charged systems to your local BlazeCut agent. IMPORTANT! Never dispose charged systems with the extinguishing agent to waste. NEED SOMETHING MORE? If there is a requirement for electronic monitoring, external alarm or other size of system, these are available.
Need help?
Do you have a question about the T Series and is the answer not in the manual?
Questions and answers