Do you have a question about the JAZ-ALP and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Ocean Optics JAZ-ALP
Page 1
JAZ-ALP Adjustable Laser Pointer Operation Manual Document Number 013-RD000-001-02-201208 Offices: Ocean Optics, Inc. World Headquarters 830 Douglas Ave., Dunedin, FL, USA 34698 Phone 727.733.2447 727.733.3962 8 a.m.– 8 p.m. (Mon-Thu), 8 a.m.– 6 p.m. (Fri) EST E-mail: Info@OceanOptics.com (General sales inquiries) Orders@OceanOptics.com...
Page 2
Every effort has been made to make this manual as complete and as accurate as possible, but no warranty or fitness is implied. The information provided is on an “as is” basis. Ocean Optics, Inc. shall have neither liability nor responsibility to any person or entity with respect to any loss or damages arising from the...
Page 3
Important Safety Notices 1. Read this manual before you attempt to use this instrument. 2. This product contains a Class 2 laser. The laser safety warning label is posted to the side of the Jaz AP module. 3. The laser described here is safe to operate, provided the user pays attention to all safety warnings: a.
Page 4
Important Safety Notices 013-RD000-001-02-201208...
Engineering-level documentation is located on our website at Technical → Engineering Docs. Upgrades Occasionally, you may find that you need Ocean Optics to make a change or an upgrade to your system. To facilitate these changes, you must first contact Customer Support and obtain a Return Merchandise Authorization (RMA) number.
Page 8
About This Manual 013-RD000-001-02-201208...
We add the Jaz-ALP to the Jaz stack, directly below the spectrometer module. The low-power laser pointer operates from three AAA batteries, so no additional power is required. The laser is a Class II 650nm red laser, so proper safety precautions must be followed.
1: Setup We attach a Gershun Tube Kit (GER-KIT) to the SMA 905 entrance aperture of the spectrometer in the Jaz stack. The GER-KIT allows control the field of view of the spectrometer from 1° to 28°. The GER- KIT is a versatile tool that can be used with fibers or directly attached to the spectrometer. The GER-KIT is priced separately.
1: Setup General Set-up The Jaz ALP is adjusted by Ocean Optics for operating in a Jaz stack (see the figure on the previous page). The Jaz ALP module is placed directly under the spectrometer module. The laser was adjusted at a distance of 5 meters. While using a 3° aperture on a Gershun Tube and a stack setup, you can use this adjustment for distances from 2 to 14 meeters between the spectrometer module and what you are aiming the laser pointer at.
Page 12
1: Setup 3. Close the lid of battery case with slight pressure in direction of red arrow. 013-RD000-001-02-201208...
Overview The Jaz-ALP device comes preset for operating in a Jaz stack at a distance of 2 to 14 meters from the object at which the laser is being aimed. Should you need to adjust the system for a longer distance, use the following instructions.
Page 14
Adjust the system in a dark room against a white wall and try to detect the light of the laser beam. Use a Gershun Tube (GER-KIT available from Ocean Optics) and start the adjustment with an aperture > 3° to pre-adjust the system. Then it is easier to adjust the system with a 3°...
Index adjustment, 5 operation, 5 battery, 3 product-related documentation, iii document safety notices, A audience, iii setup, 1, 3 purpose, iii summary, iii unpacking, 2 upgrades, iii laser adjustment, 5 013-RD000-001-02-201208...
Need help?
Do you have a question about the JAZ-ALP and is the answer not in the manual?
Questions and answers