SoftBank Whiz P0004930100R Manual page 7

Setup the Notification Pager
In order to receive the alert on the notification pager, the notification pager transmitter must be setup in Whiz i.
1
Turn on the notification pager receiver and the machine
2
Check if the machine is connected to the Robot Operations Center (ROC)
 Please check your mobile phone cellular connection in advance. Robot Operations Center (ROC) will not be connected to
LTE in an area where there is no signal.
 The connection status to the ROC will be shown by the ROC indicator on the display (⇒see "Touch Display")
6