Advertisement
NATURAL WOOD ORNAMENTS- Sublimation
HDWSBO | HDWOO1 | HDWBO1 | HDWBELL | HDWSNOMAN | HDWBALL | HDWTREE
GENERAL SUBLIMATION PROCESS
Recommended Equipment & Accessories
• Sublimation Printer
• Standard Flat Heat Press- Swing-away style press recommended
• Heat Tape
• Teflon sheet or Blowout paper
Nov-21
Natural Wood Ornaments
Advertisement
Table of Contents
Summary of Contents for Johnson Plastics Plus HDWSBO
- Page 1 Natural Wood Ornaments NATURAL WOOD ORNAMENTS- Sublimation HDWSBO | HDWOO1 | HDWBO1 | HDWBELL | HDWSNOMAN | HDWBALL | HDWTREE GENERAL SUBLIMATION PROCESS Recommended Equipment & Accessories • Sublimation Printer • Standard Flat Heat Press- Swing-away style press recommended • Heat Tape •...
- Page 2 Recommended Settings Time 50-60 sec. Temperature 380-400°F Pressure Medium-Heavy General Sublimation Instructions • Preheat the heat press to 390-400°F. Set the time to 50-60 sec., set pressure to medium/moderate. • Remove protective masking and place product blank face down onto the printed transfer. Secure the product blank to the transfer paper with heat tape.
- Page 3 o The print settings may need to be adjusted. Also check that the proper paper type and/or color profile is selected before printing the image. o Convert the colors used in the image to RGB color mode in the design/layout software before printing.
Need help?
Do you have a question about the HDWSBO and is the answer not in the manual?
Questions and answers