Quick Start Guide Foreword General This manual introduces the functions and operations of the wireless input expander (hereinafter referred to as the "input expander"). Safety Instructions The following signal words might appear in the manual. Signal Words Meaning Indicates a high potential hazard which, if not avoided, will result in DANGER death or serious injury.
Page 3
Quick Start Guide ● All designs and software are subject to change without prior written notice. Product updates might result in some differences appearing between the actual product and the manual. Please contact customer service for the latest program and supplementary documentation. ●...
Quick Start Guide Important Safeguards and Warnings This section introduces content covering the proper handling of the Device, hazard prevention, and prevention of property damage. Read carefully before using the Device, comply with the guidelines when using it, and keep the manual safe for future reference. Operation Requirements ●...
Quick Start Guide 1 Introduction Wireless input expander is a conversion device that connects to a detector through wired mode, and sends the message in wireless mode to the security system. It can be set up via the DMSS app for iOS and Android phones.
Quick Start Guide 3 Design 3.1 Appearance Figure 3-1 Appearance Table 3-1 Structure Name Description ● Flashes green quickly: Pairing mode. ● Solid green: Alarm event was triggered. Indicator ● Solid green for 2 seconds: Pairing successful. ● Slowly flashes green for 3 seconds: Pairing failed. Peripheral port Connect the peripheral with the alarm cable.
Quick Start Guide 4 Connecting to the Hub Before you connect it to the hub, install the DMSS app to your phone. This manual uses iOS as an example. ● Make sure that the version of the DMSS app is 1.96 and later, and the hub is V1.001.0000000.4.R.211014 and later.
Quick Start Guide 5 Installation Prior to installation, connect the input expander to the hub and check the signal strength of the installation location. We recommend installing the input expander in a place with a signal strength of at least 2 bars. We recommend using expansion screws when installing the input expander.
Page 12
Quick Start Guide Item name Item name Attachment panel Input expander Step 1 Drill 2 holes into the door according to the hole positions of the attachment panel. Step 2 Put the expansion bolts into the holes. Step 3 Align the screw holes on the plate with the expansion bolts. Step 4 Secure the attachment panels with ST3 ×...
Need help?
Do you have a question about the ARM310-W2-868 and is the answer not in the manual?
Questions and answers