Component - Philips DVP5160 Owner's Manual

D
Press to highlight one of the
following options.
BRIGHTNESS
Increase the value to brighten the picture
or vice versa. Choose zero (0) for
average setting.
CONTRAST
Increase the value to sharpen the picture
or vice versa. Choose zero (0) to
balance the contrast.
TINT
Increase the value to darken the picture
or vice versa. Choose zero (0) for
average setting.
COLOR
Increase the value to enhance the colour
in your picture or vice versa. Choose
zero (0) to balance the colour.
E
Press to adjust the setting that best
suits your personal preference.
F D~E
Repeat steps
color features.
G
Press OK to confi rm.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
01-51_dvp5160_12_eng2.indd 41 01-51_dvp5160_12_eng2.indd 41
DVD Menu Options
A
B
for adjusting other

Component

This setting allows you to toggle the
output of the video signal between RGB
(on scart) and Interlaced YPbPr.
In 'Video Setup Page', press
select { Component }, then press
{ Interlaced }
Select this for Interlaced YPbPr
connection.
{ RGB }
Select this for scart connection.
Use to select a setting and press
OK to confi rm.
Warning:
When the DVD player is set to
Interlaced YPbPr, some TV may not
properly synchronise with the
player on the SCART connector.
(continued)
to
.
41
2007-03-30 4:07:14 PM 2007-03-30 4:07:14 PM