• This is not a professional device for ORAVA electrical appliances are commercial use. manufactured according to state-of- • This device is intended for the following the-art knowledge and recognized uses in addition to domestic use: safety rules.
Page 3
Electrical safety • If the power cord / power cord is damaged, it must be replaced by the • Before connecting the electrical device manufacturer, its service center, or to the power supply for the first time, similarly qualified person to avoid the check that the mains voltage indicated risk of electric shock.
Safety of persons Before you call for service: • This electrical device is intended 1. Check that you are not able to remedy for use by non-electrically qualified an operating fault yourself as described persons (laymen) according to in Chapter „Troubleshooting“ the instructions specified by the 2.
Page 5
Inspection/Commissioning This symbol alerts users that if the safety instructions for • We recommend performing initial and using and operating the device subsequent regular inspections of the are not followed, there is a risk device. • Never use the device if it is incomplete, Risk of serious injury or death! damaged or any part of it has been Risk of device damage or...
Page 6
• Do not partially cover the device. • Do not subject the device or its Do not place any objects and/or accessories to strong vibrations and / or shocks. Do not drop or hit objects decorative and other fabrics on the device, do not insert or allow foreign on the device.
Page 7
• The power cord must • Do not store the device with the power cord and remain accessible to safely disconnect the device from signal cables wrapped the power. around its body. Loosely fold the power cord in the • The cable is not subjected way it was put together to mechanical stress in the original packaging...
Page 8
Power Supplies / Batteries • Remote control power supply safety instructions to batteries. Always store batteries out of the reach of children. Seek medical attention immediately if the batteries are swallowed by children. Wipe the batteries with a dry cloth before inserting them into the remote.
Page 9
DECLARATION OF CONFORMITY Short text Declaration of Conformity: ORAVA retail 1, a.s. hereby declares that the DVD-405 complies with the essential requirements and other relevant conditions of Directive 2014/53/ EU of the European Parliament and of the Council. The full text of the Declaration of Conformity is available at: www.orava.eu...
Contents Intended use of the device ..................2 General safety instructions and warnings ............2 Special Safety Instructions and Cautions 4 ............4 About the operating instructions ...............12 Discs that can be played on this player ............12 Notes on Discs ....................14 Characteristics ....................14 Parts and controls index ...................15 Inserting batteries into the remote control ............19 Connections ................
Page 11
SETUP MENU ................37 Settings via the SETUP menu 37 ..............37 Additional information ............41 Copy songs from an audio CD to the USB drive in MP3 format .......41 Deleting Files from the USB ................41 Troubleshooting ....................42 Glossary ......................42 Technical Data ....................46 Warranty ....................
About the operating Expressions used for disks instructions • Title The longest parts of the picture or sound on a DVD disc, movie, etc. in the video • The information in this manual describes the program, or the album name for audio controls on the remote control.
Page 13
Note on PBC (Playback Control) Important Notice: Depending on the condition and (VIDEO CDs) characteristics of a particular disc, it may not The device supports Ver. 1.1 be playable even though it is in one of the a ver. 2.0 for VIDEO CDs. Depending on the previously supported formats.
Notes on discs • High quality 96kHz / 24bit audio D / A converter The DVD player is equipped with a 96KHz Disk handling / 24Bit D / A converter for high-quality reproduction of coded disc sound. • Hold the disc only at the edges to prevent •...
Index of parts and controls Front panel 1 POWER switch 8 USB (On/Off/Standby) (USB connector for USB drive 2 > NEXT connection) (Foward) 9 . PREV 3 N X PLAY/PAUSE (Reverse) 4 Disc carrier 5 Remote control sensor (RC) 6 Display 7 A OPEN/CLOSE (Ejecting/Ejecting the Disc Carrier)
Page 16
Rear panel 1 HDMI Audio/Video output 2 2-channel R/L audio output Audio output for right and left channel 3 VIDEO OUT 4 Digital Output Connector (COAXIAL) 5 SCART Output for connection to TV...
Page 17
Display 1 Playing 6 Disc type (CD) 2 Disc type (DVD) 7 Disc type (MP4) 3 Time or title/chapter/track number 4 Disc type (MP3) 5 Pause Warning! The shape of the display and the arrangement of the items displayed may differ from the illustration above.
qj ZOOM 1 POWER (1) (Zoom in/out) (On/Standby) qk OPEN/CLOSE 2 0 - 9, 0/10, 10+ (Numeric button) ql SUBTITLE 3 SETUP w; LANGUAGE (Select language for audio) 4 b/v/V/B wa OSD (Display information) (Use the arrow buttons to select ws PROG (Programming) menu items in SETUP mode or DVD wd DVD/USB...
Involvement Connection to TV and Audio/Video components Necessary cables HDMI cable for connection to TV Video or component video cable for connection to TV Audio cable When connecting the cable, observe the resolution of the cable ends with the connectors on the components. Coaxial cable for connecting to a receiver / amplifier equipped with a coaxial digital input jack.
Page 21
Connection to TV SCART output connector Connect the SCART cable (not supplied). The connection provides higher picture quality. Composite video output connector Composite video output is currently most used for video connections and is supported by most A/V receivers and TVs. The composite video output is factory set. HDMI Connect the HDMI cable.
Page 22
Connect to a receiver/amplifier equipped with 2 channel inputm Use an audio connection cable to connect to an external A/V receiver or amplifier with 2-channel input jacks. Connect the cable between the jacks on the player and the receiver / amplifier.
Page 23
Connect to a receiver/amplifier equipped with a coaxial digital input jack Use the digital coaxial or optical audio output jack to connect to an external A / V receiver or amplifier equipped with a Dolby® Digital or DTS® decoder and a coaxial digital input jack. It is necessary to buy coaxial or optical cable.
Page 24
Speaker setup example (not supplied) for optimal surround sound In order to maximize the surround effect, all speakers except the subwoofer should be placed equidistant from the listening position. Subwoofer You can place the subwoofer anywhere. However, it is preferable to place it near the front speakers.
Page 25
Speaker layout 1 TV or monitor 2 Front left speaker 3 Subwoofer 4 Center speaker 5 Front right speaker 6 Rear left speakers 7 Rear right speaker 8 Listening and tracking position Note: Do not place the center speaker farther away from your listening position than the front speakers.
Disc playback Disc playback After performing step 5 Depending on the DVD, the DVD Menu may appear on the TV screen. Programs can be Depending on the DVD or VIDEO CD, some played interactively, following the instructions functions may be different or unavailable. in the Menu.
Playback using Fast forward / reverse various functions Press the M button. Press M repeatedly to change the playback speed. Press again to Search for the desired title, resume normal playback chapter or track Press the m button. Press m repeatedly to change During playback, you can search for a the playback speed.
DVD menu Resume playback from the disc stop Some discs have a “Title Menu” or “DVD position (DVD only) Menu”. For some DVDs, these items may simply be called “Menu” or “Title”. Your device remembers your current position Use the title menu last stopped playback by pressing x.
Playing VIDEO CDs DVD menu with PBC (PBC Some DVDs allow you to select the contents of the disc using the Menu. When playing Playback) these DVDs, you can select items such as subtitle language, audio language, etc. using the DVD Menu. With PBC (Playback Control) functions, you can enjoy simple interactive operations, Press MENU.
Playback of an Repeat play enlarged/reduced All titles or tracks on a disc, or individual image titles, chapters or tracks, can be played back repeatedly. Depending on the DVD, repeat playback may not be possible. You can enlarge the playback picture using the ZOOM button.
Changing viewing Display subtitles angles If subtitles are recorded on the discs, you can view the subtitles at any time while playing For DVDs that record scenes from different the disc. If subtitles are recorded in multiple viewing angles - languages on the discs, you can select any the camera indicator appears on the screen.
Select an audio track View playback information If multiple audio tracks are recorded on the discs (eg AUDIO 1 in Dolby Digital format Môžete zobraziť údaje ako je prehrávací čas and AUDIO 2 in PCM stereo format), you a zostávajúci čas aktuálneho titulu, kapitoly can change these tracks.
Switch the output Program compilation video signal format All titles or tracks on a disc or individual titles, chapters, or tracks can be programmed and Use the V-MODE button on the remote to then played back. Depending on the DVD/ switch the format of the video output signal.
Playback files from MPEG 4 (DivX) playback USB drive The player can play MPEG 4 (DivX) video The player allows you to play back files stored USB drives. files stored on the disc. Insert the USB drive into the Insert / mount media with USB connector.
Playing files in JPEG You can view the images format using the playback control buttons. If you press PLAY, all the pictures The player can play JPEG image files stored will be displayed in sequence, using the NEXT/PREV buttons to on a disc.
MP3/WMA playback Note: If the disc contains mixed files, in the right window, you can fi what type of The player allows you to play MP3 in an files you want to play. Audio, Photo and Video can be selected. audio quality comparable to a CD.
Ponuka SETUP SETUP menu GENERAL SETUP This offer has the following structure. After pressing the SETUP button on the remote control in stop mode, the Setup menu GENERAL SETUP appears on the TV screen with icons in the TV DISPLAY following structure: ANGLE MARK OSD LANG...
Page 38
f) HDCD: Set digital filter options. You AUDIO SETUP can set OFF to turn off the filter, or This offer has the following structure. select 1x and 2x for the filter stage. AUDIO SETUP g) LAST MEMORY: You can set ON to SEAKER SETUP turn on the memory of the playback SPDIF SETUP...
Page 39
DOLBY DIGITAL SETUP VIDEO SETUP (NASTAVENIE OBRAZU) This offer has the following structure. This offer has the following structure. DOLBY SETUP VIDEO SETUP DUAL MONO COMPONENT DYNAMIC SCAN MODE (DYNAMIC COMPRESSION) QUALITY HDMI SETUP Resolution HDMI Setup a) DUAL MONO: The following audio output modes can be set: L-MONO or a) COMPONENT: Two video output R-MONO for left channel sound or...
Page 40
d) HDMI SETUP: Set the HDMI audio PASSWORD: digital output in AUTO and PCM The password is set to “1234” at the modes. factory. Change it by selecting and entering the old password (OLD PASSWORD), then entering the new password (NEW PASSWORD) and confirming the new password (CONFIRM PWD).
More details Copy tracks from an Delete files from USB audio CD to a USB drive drive in MP3 format The player allows you to delete the desired or all files from the connected USB drive. The player allows you to copy the desired or all tracks from an audio CD being played Connect a USB memory stick back to a USB drive in MP3 format with audio...
Troubleshooting Sound No sound. , The connecting cable is not connected If you experience a problem while the device securely. is operating, try to solve it using the overview , The connecting cable is damaged. below before requesting a repair. If the , If “MUTING”...
Page 43
When playing Dolby audio tracks Operation Digital is a surround effect difficult The remote control does not work. audible. , There are obstacles between the remote , Check the speaker connections and control and the unit. settings. , The distance between the remote and the , Depending on the DVD, the output signal unit is too far.
Page 44
Dictionary The subtitle language cannot be changed. , Multilingual subtitles are not recorded on Transfer speed the DVD. A value representing the number of , Changing the subtitle language is not compressed video data on a DVD per available on the DVD. second.
Page 45
Parental Control A DVD feature that allows you to restrict Digital audio compression technology playback by the age of the user and the level developed by Digital Theater Systems, Inc. of restriction for the country. The limitation is This technology uses 5.1 channel surround different for each disk;...
Technical specifications DVD/CD/CD-R/CD-RW/VCD/SVCD/DivX/MP3/WMA/JPEG player Video output: RCA VIDEO 1.0 P-P, 750 Ohm, asymmetric, sych. negative SCART connector, HDMI v.1.3 Audio output 2-channel analog output RCA connector x 2 Signal-to-noise ratio Over 95dB Digital coaxial output 0.5 P-P 75 Ohm Total harmonic distortion Less than 0.0025% Frequency range 20 Hz - 20 kHz...
Need help?
Do you have a question about the DVD-405 and is the answer not in the manual?
Questions and answers