Divx Subtitle - Philips DVP3256K User Manual

Setup Menu Options
Preference Page
Mp3�Jpeg Nav
Password

DivX Subtitle

Default

dvp3256K_93_eng1.indd 42
(continued)
(underlined options are the factory default settings)
Mp/Jpeg Navigator can only be set if the disc is recorded with a
menu. It allows you to select different display menus for easy
navigation.
{ Without Menu } –
{ With Menu }
Note: This feature is not available for USB mode.
The password is used for Disc Lock and Parental control.
The default password is '16900'.
To change the password:
1) Press OK to access the change password menu.
) Use the numeric keypad 0-9 on the remote control to
enter your existing six-digit password at { Old Password }.
Note: When doing this for the first time or if you forget your
existing password, enter '16900'.
) Enter the new six-digit password at { New Password }.
) Enter the new six-digit password again at { Confirm PWD }.
5) Press OK to confirm and exit the menu.
Select the font type that supports the recorded DivX subtitle.
{ } (Simplified Chinese)
This feature enables you to reset all the setup menu options and
your personal settings to the factory defaults, except your
password for the Disc Lock and Parental control.
Press OK to confirm the default reset.
Display all the files contained in the
MP/Picture disc.
– Display the folder menu of the MP/
Picture disc.
Old Password
New Password
Confirm PWD
OK
– Display a standard list of simplified
Chinese subtitle fonts provided by
this unit.
2008-03-27 1:57:47 PM