Advertisement
1. When watching a broadcast, you can control the programme, volume, etc. or select the external input
with voice commands instead of using the remote control.
2. You can use the same functions as the Magic Remote's pointer and arrow keys.
Some controls may be limited in external input mode.
•
The app's screen and functionality are subject to change without prior notice.
•
Available features may di er depending on your country and OS.
NOTE:
TV Rating Locks/Enabling Programme Locks/Application Locks/Input Locks-----The initial password is set
as "0000". When France or Norway is selected for Country, the password is not "0000" but "1234".
Resetting a Lost Password
If you lose the password you set, you can reset it as follows:
1. Press the
button on the remote control.
2. Select
General
3. Press
(Programs)
The master password input window will appear. Enter the numbers "0313" in the master password input
window, then press Enter. The password will be reset.
FAQS
GENERAL PROBLEMS WITH TV SET
PROBLEM
No Power
No Picture
No sound
or distorted sound
No operation can be
performed with the
remote control
Safety.
(Programs)
(Programs)
Make sure power plug is inserted correctly into power outlet.
Make sure the following is connected correctly
• Adjust the antenna
• Move TV away from any products that may cause interference.
• Auto tune the unit again
• Go to another channel
• Take sure everything is connected correctly
• Check if input settings for TV is correct
• Audio settings are properly set
• Make sure volume is not muted.
• If earphones are connected, unplug them.
• Adjust the volume
• Check the batteries are inserted correctly
• Replace batteries if they have been used for awhile
• Make sure to point remote control at the TV sensor and try again
• Make sure you are not further then 6m away from TV.
• Remote any obstacles that may be in the way of direct line of sight from
remote control to the TV sensor.
(Programs)
on the remote control.
SOLUTION
21
www.PyleUSA.com
Advertisement
