Configure Your Phone; How To Power Off Or On The Handset; Power - Philips CD6452B User Manual

3.4 Configure your phone

Depending on your country, the Welcome
screen may not appear. In that case, you do not
need to select the country code to configure your
phone.
Before using your phone, you need to configure it
according to the country of use. After charging it
for a few minutes, the Welcome screen appears.
Follow these steps to configure your phone:
<
1
Press to display the list of countries
• Available country will display on the screen.
Note
>
If is pressed, the handset will show the
Welcome screen again.
u d
2
Press /
<
3
Press to confirm your selection
• Your phone is configured according to your
selected country and back to idle screen.
Note
Once the country is selected, the default line
settings for the selected country will be applied to
your phone automatically.
Tip
If you chose the country in use wrongly or would
like to change the country after the first
configuration, you can press
enter into the main menu, input
to default settings. After around 30 seconds, the
phone will go back to
can select the country again.

3.5 How to power off or on the handset

power

You can power off your handset in order to save
battery power.
e
1
Press and hold
power off the handset
e
2
Press to power on the handset again
12
to scroll to your country
<
in idle mode to
##**793
screen and you
Welcome
for about five seconds to
to reset
Getting started