General Information; G10164; Main Functions - G3 Ferrari G10164 User Manual

- Do not use near or under flammable materials (like
curtains), heat, cold spots and steam.

GENERAL INFORMATION

Before using for the first time, carefully wash all the parts
that will come in touch with food such as the container.
Always close the lid before every use.
Never leave the appliance unattended while it is running.
Use the kettle only to heat or boil water.
Fill the kettle with cold water, being careful to stay within
the limits indicated on the capacity of the storage tank
(maximum 1.7 L, 0.5 L minimum).
Always pour the water before turning on the kettle. Never
pour liquids after switching on.
If the kettle operates when it's empty, the safety device
shuts down automatically to prevent any damage. It won't
be possible to operate until the cooling of the resistance.
After having boiled the water, remove the plug and drain
completely to avoid the scaling of the electric resistance.
Once finished, unplug the unit and wait for the complete
cooling of each part before storing or cleaning.
Do not immerse the appliance in water or other liquids. In
any case, avoid splashing of water or other liquids.
Put the kettle on stable shelves and floors.
DESCRIPTION G10164
1 Lid
4 Base
7 Nozzle with filter

MAIN FUNCTIONS

Before using, operate the kettle 2 or 3 times and boil the maximum amount of water (1.7 liters) by replacing
each time hot water with cold water. To open the lid, use the button (8). In following uses:
- Pour in the kettle the desired amount of water, never exceeding the limits indicated (MAX: 1.7 liters, MIN:
0.5 liters). Close the lid until it locks in position and connect the plug to the electric power outlet.
- Place the kettle on the slot of the power base (4), and act one of the following procedures
BOILING
- At the switch on, the display (9) shows the temperature inside the kettle.
- Press the key
increases. When the liquid is boiling, the thermostat automatically turns off the unit. Use hot water as you
2 Control knob
5 Container
8 Open Lid Button
(2). The blue light inside the kettle switches on and the temperature on the display
3 Handle
6 Transparent graduated window
9 Display
10