Advertisement
Available languages
Available languages
LCD Monitor Stand
Item no. 41 60 80
1.
Intended use
The product is designed to fix a LCD monitor with a weight of up to approx. 10 kg, with "VESA wallmount
system" onto a table (75 mm or 100 mm).
For safety purposes, you must not rebuild and/or modify this product. If you use the product for purposes other
than those described above, the product may be damaged. Read the instructions carefully and keep them.
Make this product available to third parties only together with its operating instructions.
2.
Delivery content
•
Base
•
Stand rod
•
Monitor bracket
•
Decorative cap
•
Mounting material
•
Operating instructions
3.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
Persons / Product
•
Do not scratch your table surface when assembling. If necessary use e.g., a protective mat or several layers
of thick newspaper.
•
Only fix the monitor stand to a sufficiently stable table top/table. Glass or ceramic tables or tables made
of stone plates or thin plastic coated wood fibre slabs are not suitable for the installation. Furthermore, the
monitor stand must not be fixed onto shelves or similarly unstable or wobbly surfaces.
•
Please occasionally check the screw connections of table mount, monitor stand and LCD monitor. Because
of the changing of positions and the movement of the monitor stand and the LCD monitor, the screw
connections might gradually loosen.
•
Only fix the monitor stand in suitable positions. Please take the heavy lever action of the monitor stand
into consideration.
•
Do not use any force when moving/changing the LCD monitor, this might damage the LCD monitor.
•
Only hold the monitor at its housing, never on the screen.
•
For desk mounting, the monitor stand including the monitor should only be positioned above the desk.
•
Do not use the monitor stand to lean on or pull yourself up with.
•
The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
•
Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
•
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
-
is visibly damaged,
-
is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stresses.
•
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
•
Also observe the safety and operating instructions of any other devices which are connected to the
product.
Miscellaneous
•
Consult an expert when in doubt about operation, safety or connection of the device.
•
Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified
shop.
•
If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
4.
Parts list
A.
Stand rod
D.
Decorative cap
B.
Base
E.
Hexagonal wrench
C.
Monitor bracket
F.
Mounting disk
G.
Washer
J.
Rounded head screw
H.
Lock washer
K.
Allen screw
I.
Hexagon socket-headed screw
M. Hexagonal wrench
5.
Mounting
Before mounting the LCD monitor, the existing base of the LCD monitor has to be taken
off. Note the monitor manufacturer's instructions on how to proceed.
Version 12/11
For mounting the LCD monitor, assistance from a second person is required. He/she has
to hold the LCD monitor while you attach it to the bracket.
Detailed illustrations on installing and positioning the screws can be found in the manufacturer's
instructions.
1.
To install the LCD monitor stand on a desk, a 9 mm hole must be drilled. Place the stand rod onto the drilled
hole and fasten it from below using the hexagonal socket-headed screw (I), lock washer (H), washer (G)
and mounting disk (F). Then, clip on the decorative cap.
Alternatively, you can attach the LCD monitor stand to the base (B) using three Allen screws (K). Screw the
Allen screws (K) tight using the hexagonal wrench (M). Then, clip on the decorative cap.
In addition, the base can be secured by desk mounting. Proceed in the same way as for the desk mounting
procedure without a base.
2.
Loosen the retaining screw of the monitor bracket (C) and slide it onto the stand rod. Set to the height
required and manually tighten the retaining screw.
3.
While a second person holds the monitor, attach it to the support plate of the monitor bracket with the four
round head screws (J).
You can now tilt the monitor horizontally or vertically for the ideal viewing position. With the horizontal pivot
joint, first the decorative caps must be removed. Loosen the Allen screw with the hexagonal wrench (E)
until the joint can be turned. Hold the monitor at all times during this process. Set the required tilt angle and
screw the Allen screw tight again. Clip the decorative caps on again.
6.
Disposal
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
7.
Technical data
Load capacity:
VESA standard:
Dimensions (W x H x D):
Weight:
© 2011 by Conrad Electronic SE.
max. 10 kg
75 x 75 mm, 100 x 100 mm
340 x 485 x 317 mm
approx. 4.55 kg
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is prohibited.
The operating instructions reflect the current technical specifications at time of print.
We reserve the right to change the technical or physical specifications.
V3_1211_02-JU
Advertisement
