Troubleshooting - Philips 190CW7 User Manual

Troubleshooting

• Safety and
Troubleshooting
• FAQs
• Common Problems
• Imaging Problems
• Regulatory Information
• Other Related Information
file:///P|/OEM MODELS/PHILIPS/CD Manual/19/190cw7/Q41G7800-813-3...W7 EDFU-0606-2006/lcd/manual/ENGLISH/190CW7/safety/saf_troub.htm 第 1 頁 / 共 3 2006/7/5 上午 11:14:19
Troubleshooting
This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these
solutions, contact Philips customer service representative.
Common Problems
Having this problem
No Picture
(Power LED not lit)
No Picture
(Power LED is amber or yellow)
Screen says
AUTO button not working properly
Imaging Problems
Display position is incorrect
Image vibrates on the screen
Check these items
Make sure the power cord is plugged into the power outlet
●
and into the back of the monitor.
First, ensure that the power button on the front of the monitor
●
is in the OFF position, then press it to the ON position.
Make sure the computer is turned on.
●
Make sure the VGA cable is properly connected to your
●
computer.
Check to see if the monitor cable has bent pins.
●
The Energy Saving feature may be activated
●
Make sure the monitor cable is properly connected to your
●
computer. (Also refer to the Quick Set-Up Guide).
Check to see if the monitor cable has bent pins.
●
Make sure the computer is turned on.
●
The Auto Function is designed for use on standard Macintosh
●
or IBM-compatible PCs running Microsoft Windows.
It may not work properly if using nonstandard PC or video
●
card.
Press the Auto button.
●
Adjust the image position using the Phase/Clock of More
●
Settings in OSD Main Controls.
Check that the VGA cable is properly connected to the
●
graphics board or PC.