Advertisement
Do not block, or insert hair pins or other foreign objects into the air inlet,
air outlet, or nanoe outlet.
- Doing so may cause fire, electric shock, or burn.
Do not store within the reach of children or infants.
Do not let them use it.
- Doing so may cause burn, electric shock, or injury.
Never modify, disassemble, or repair.
- Doing so may cause ignition or injury due to abnormal operation.
Contact an authorized service center for repair.
Regularly clean the power plug to prevent dust from accumulating.
- Failure to do so may cause fire due to insulation failure caused by
humidity.
Disconnect the power plug and wipe with a dry cloth.
Immediately stop using and remove the power plug if there is an
abnormality or failure.
- Failure to do so may cause fire, electric shock, or injury.
<Abnormality or failure cases>
•Air is not emitted
•Unit stops sporadically
•Interior becomes red hot and smoke is emitted
- Immediately request inspection or repair at an authorized service
center.
Disconnect the power plug by holding onto it instead of pulling on the cord.
- Failure to do so may cause the wire in the cord to break, and may cause
burn, electric shock, or fire due to a short circuit.
When you see sparks around the air outlet while using the hot air setting,
stop use and remove the lint on the air outlet and air inlet.
- Failure to do so may cause burn or fire.
Fully insert the power plug.
- Failure to do so may cause fire or electric shock.
WARNING
5
Advertisement
