Brother Industries HL-J6010DW Quick Start Manual

Quick Setup Guide
HL-J6010DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
EN
1
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies. The components included in the box may differ depending on your country.
The images in this guide are for illustration purposes only and may differ from the actual
products.
2
Load plain A4 paper
Pull the paper tray completely
out of the machine as shown
by the arrow.
3
Connect the power cord
5
Install the inbox ink cartridges
Open the ink cartridge cover.
6
Set the date and time
Follow the LCD instructions to set the date and time.
After setting the date and time, you can set the
Brother LCD Message defaults.
Video setup instructions:
support.brother.com/videos
Fan the paper well. Load the paper in the tray
and adjust the paper guides.
NOTE
You can adjust the control panel
angle to read the LCD more easily.
Quickly shake just the black ink
cartridge horizontally 15 times as shown,
before inserting it into the machine.
7
Follow the LCD instructions, and
then press [Start]. The machine
prints the Print Quality Check Sheet.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
NOTE
• Save all packing materials and the box in case you must ship your machine.
• You must purchase the correct interface cable for the interface you want to use.
USB cable
Use a USB 2.0 cable (Type A/B) that is no more than 5 metres long.
Ethernet (Network) cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
• Brother aims to reduce waste and save the raw materials and energy required for their
production. Read more about our environmental work at www.brotherearth.com.
After finishing the machine setup, you can change the paper type or size. For more information
about paper handling, see the Online User's Guide at support.brother.com/manuals.
Do not exceed
this mark (bbb).
Slowly push the paper tray
completely into the machine.
4
Select your country or language
After turning the machine on, you may need to set your country or language (depending on
your machine). If required, follow the LCD instructions.
Follow the LCD instructions to install the ink cartridges. Close the ink
cartridge cover. The machine will prepare the ink tube system for printing.
NOTE
The first time you install a set of ink cartridges the machine will use an amount
of ink to fill the ink delivery tubes for high quality printouts. This process will only
happen once.
Check the print quality
Pull out the paper support until
it locks into place.
OK Poor
Follow the LCD instructions and check
the quality of the four colour blocks on
the sheet, and then start the cleaning
procedure if required.
D01YRF001-00
UK
Version 0