Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Muse electronics Two
- Page 1 Owner’s Manual Muse Electronics Model Two Digital to Analogue Converter...
- Page 2 20 bit words and is then sent via a serial data port to the output DACs. The all important latch enable signal is generated in a unique way by the Model Two. After being re-clocked by the receiver section, a special logic circuit eliminates ant timing related errors (jitter) caused by the digital filter.
- Page 3 A pair of high performance 20 bit DACs operated at 8 times the incoming data rate provide a current output which is proportionate to the amplitude of each digital word. Each DAC is actually comprised of two 19 bit DACs, this configuration ensures that linearity around digital zero is maintained. Conversion from a current to a voltage is accomplished by the simplest possible element.
- Page 4 (RCA) signals, then use the unbalanced outputs of the Model Two. As the standard output of the Model Two is 1 volt RMS at full scale (0 dB), normal or un-attenuated inputs are the best choice. It should be noted that an optional 2 volt RMS output is the higher performance configuration.
- Page 5 Warranty Registration Form and within 10 days of the date of purchase, returning it to Muse Electronics along with a copy of the bill of sale.
- Page 6 In the case of a Muse product whose consumer purchase was made outside the United States, the importing distributor in the country where the purchase was made will provide the warranty. The warranty may be different than the one stated above, so be sure to check with your dealer for details. HDCD is a registered trademark of Pacific Microsonics, Incorporated ®...
Need help?
Do you have a question about the Two and is the answer not in the manual?
Questions and answers