Get Connected; Site Survey - FORESIGHT TIMS MVP Setup And Configuration Manual

Get Connected

Get Connected
Connecting your TIMS Medical Video Platform (MVP) System comprises the following steps,
reviewed in this chapter:
▪
Conduct a Site Survey
▪
Set Region AC Voltage Setting
▪
Make Standard PC Connections
▪
Make Modality Connections
▪
Connect Trigger (optional)
▪
Configure Network
After you connect your system, additional software configuration steps are required before the
system is ready to use:
▪
Configure Security (optional)
▪
Configure Channels and DICOM Class Lists
▪
Configure Modality Worklist
▪
Configure DICOM Send

Site Survey

Before you set up the hardware connections or software configuration for your TIMS MVP™
system, you should perform a site survey to establish general requirements.
•
Determine requirements and location of TIMS units, including proximity to power and
network adapters.
•
Determine the type, number, and location of video imaging devices you will connect to
the TIMS MVP™ system.
•
Determine if distances to video sources will exceed 6 meters, in which case a video
amplifier may be required.
•
Determine network settings (domain or workgroup, dynamic or static IP address, and so
on).
TIMS MVP™ Setup and Configuration Guide
Go to Page 74
Go to Page 27
See Operator's Guide
See Operator's Guide
1