BorMann PRO BBP4600 Manual page 8

EN
Assembly instructions/main adjustments/operating instructions
Attaching the U-shape handle
Unscrew the handle adjusting knob (Fig 1), take out the components (Fig 2), put the handle seat under the handle (Fig 3), cover the handle seat ,make sure the
two parts of handle seat are well jointed (Fig 4), put the spring in the boss and screw the knob until the handle is fixed tightly on the pole of machine (Fig 5) .
Adjusting Work Height
Adjust the handle according to your comfortable position, keep space to prevent cutting tool from cutting the ground.
Use the supplied tool to tight or loose the screw with the clamping rings to adjust the fixing position of wire according to different need (Fig 6).
Assembling the brush cutter
Mount the shield at correct position, fix it with screws provided (b1). fix stop collar to the shaft (b2), add the dust cover (b3-b4), assemble blade and press plate
(b5-b6). use the provided pin to lock the spindle , fix the press plate with flange screw and tighten it with provided socket (b7-b9).
Assembling the string trimmer
Mount the shield at correct position, fix it with screws provided (c1). fix stop collar to the shaft (c2), fixing the hemline to the shield and fix the screws tightly
with the provided tool (c3), add the dust-proof shield (c4), use the provided pin to lock the spindle, fix the spool to the machine and tight it.
The trimmer is equipped with auto-feed system, which automatically rolls off the line to retain the cutting diameter.
To use line cutting, the shield hemline must be attached to the shield.
Recommended position for cutting
How to Joint poles
The pole of machine is divided into two parts, joint the two parts in correct position( step e1-e2), tight the knob (e3).
8
WWW.BORMANNTOOLS.COM
Shoulder belt fixing and releasing
Fix the clap ring on the pole of machine according to your need,
hook the belt on the clap. To release the belt, press the buckle
with pressure.