SVS SoundPath Wireless Audio Adapter Owner’s Manual SVS SoundPath Wireless Audio Adapter Thank you for choosing SVS! The SoundPath Wireless Audio Adapter reduces subwoofer cable clutter without sacrificing performance and unlocks wireless connectivity for powered speakers, amplifiers and more. Transmit a pristine, full-range audio signal up to 65-feet at CD-quality and start enjoying the benefits of wireless audio now.
Page 3
General Placement and Set-up Tips » » Try to maintain line-of-sight (no walls or solid barriers) between the transmitter and receiver for best results. » Receiver should be within 65 feet of transmitter for best results. » Avoid placing the transmitter next to devices that could create signal interference, such as mobile phones, baby monitors, 2.4 GHz wireless phones and 2.4 GHz Wi-Fi routers.
Page 4
Connecting the Wireless Receiver to your Subwoofer 1. For AV processor applications, connect the 3.5 mm to single RCA adapter cable to the LFE input and the input on the wireless receiver. 2. For 2-channel stereo pre-amp applications connect the 3.5 mm to dual RCA adapter cable to both the L and R subwoofer inputs and to the input on the wireless receiver.
Connecting the Wireless Receiver to your Powered Speakers 1. For AV processor applications, connect the 3.5 mm to single RCA adapter cable to the LFE input and the input on the wireless receiver. 2. For 2-channel stereo pre-amp applications connect the 3.5 mm to dual RCA adapter cable to both the L and R powered speaker inputs and to the input on the wireless receiver.
FAQs and Troubleshooting Does my AV processor correct for the latency (time delay) of the wireless unit? Yes, this will be reflected in a longer than normal subwoofer distance, as shown under the set-up section of the AV processor. An additional 25-28 feet (beyond the actual subwoofer distance) is normal.
Safety Instructions Read these instructions. » Keep these instructions. » Heed all warnings. » Follow all instructions. » Do not use this apparatus near water. » Clean only with dry cloth. » Install in accordance with the manufacturer’s instructions. » Do not install near any heat sources such as radiators, heat registers, stoves, or »...
Page 8
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. (877) 626-5623 | 260 Victoria Rd. Youngstown, OH, USA | svsound.com...
Need help?
Do you have a question about the SoundPath WS-16-R and is the answer not in the manual?
Questions and answers