1. Manuals
  2. Brands
  3. Perfectone Manuals
  4. Cordless Telephone
  5. IP 300
  6. User manual

Perfectone IP 300 User Manual

Perfectone net ware co. ltd internet phone user manual ip 300
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IP 300 User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Perfectone IP 300

  • Page 1 IP 300 User Manual...

  • Page 2: Table Of Contents

    1.Before Getting Started ...3-6 Product Description ... 3 IP 300 IP phone Appearance Introduction ... 3 Function Keys of IP 300 IP Phone Introduction (Normal State) ... 4 Features ...4-5 Standard and Protocol... 5 Operating requirements... 6 Electric requirements... 6 Size...

  • Page 3: Before Getting Started

    IP300 phone wherever the destination phone is in the world. When IP 300 series IP net phone is in generalized out line mode, it can place calls to every ordinary telephones in the world at an extremely low price.

  • Page 4: Function Keys Of Ip 300 Ip Phone Introduction (Normal State)

    Function Keys of IP 300 IP Phone Introduction (Normal State): Keys Local IP With handset hung, press this key to get local IP address of the phone Missed Call With handset hung, press this key to review missed number Subnet Mask...

  • Page 5: Standard And Protocol

    80 entries each for missed calls, answered calls and dialed calls Adjustable volume for both handset and speaker Voice prompt Standard and Protocol IP 300 IP Phone supports following standard and protocol: IEEE 802.3 /802.3 u 10 Base T / 100Base TX Major G.7XX audio codec H.323 V4...

  • Page 6: Size

    IP 300 User Manual Power: 5 W (max.) Power adapter: AC/DC input 230V output 7.5V 0.8A Network interface:2X RJ-45 Ethernet Connectors Size 198 x 176 x 60 mm (L x W x H)

  • Page 7: Installing The Ip Phone

    IP 300 User Manual INSTALLING THE IP PHONE Before installing your IP Phone, it is useful to know what kind of IP addressing your LAN or router is using. A. What is the IP Addressing of your network? Most networks, including the Internet, use identification codes called IP (Internet Protocol) addresses to identify and locate the devices that share their services.
  • Page 8 IP 300 User Manual Jack. Plug the other end of the cable into an appropriate LAN or DSL/Cable router port or a HUB. Power on IP phone: plug the power cord adapter into the Power Jack. Then plug the other end of the power cord adapter into the appropriate wall outlet.

  • Page 9: Configuring The Ip Phone

    IP 300 User Manual CONFIGURING THE IP PHONE This chapter shows you how to configure the IP phone by keypad, web browser and telnet. It also tells you the meanings of the items you might encounter in the setting process.
  • Page 10 IP 300 User Manual...
  • Page 11 What if your network is using Static IP Addressing ? When your LAN settings are using static IP addressing, you should 1.Changing DHCP to static in the IP Phone Before you assign a static IP address, the IP Phone’s DHCP mode must be changed.
  • Page 12 b. Enter the subnetmask address 1. When " " " " " " " " " " " " button to input the subnetmask address. 2. Use the dialpad to enter the subnetmask address. For example: 255.255.255.0 (Please press “ ”...
  • Page 13 IP 300 User Manual Refer to above operation; you can reach any menu to modify any value. Please refer to following structure illustrations to learn the values of each menu item. As for the meaning of each item and value, please refer to Web Browser Setting chapter.
  • Page 14 IP 300 User Manual...
  • Page 15 IP 300 User Manual...

  • Page 16: Using The Web Browser To Configure The Ip Phone

    IP 300 User Manual . Using the Web Browser to configure the IP phone The following diagram imitates a simple network layout in which the PC and IP300 connect to the internet through a router. Internet on the other side)

  • Page 17: Network Setting

    IP 300 User Manual Fig1 Http Setting Page Network Setting Fig 2 Network Setting Page iptype: Set phone gets relevant network parameters by selecting corresponding item from drop down list.
  • Page 18 IP 300 IP phone is shipped from the factory with DHCP on. So, if your LAN or router is configured to use DHCP addressing, the IP phone’s LAN parameters will automatically configure as...
  • Page 19 IP 300 User Manual IP address of IP phone here. dns: With static ip selected in iptype drop down list, please enter IP address of DNS server here. dns 2: With static ip selected in iptype drop down list, please enter IP address of backup DNS server here.
  • Page 20 IP 300 User Manual Note With Net2phone selected here, please set other necessary parameters: check use service option, and then fill IP address or domain name of designated server into service addr field; then set service port as 6801; fill account and password of Net2phone card into account and pin fields.
  • Page 21 IP 300 User Manual “dialnum” from the “Use dialplan” list box and put “00” into “dial number”. Auvtech: use Auvtech’s H.323 system. When connected with Auvtech’s system, please select “auvtech” from the “nat traversal ” list box, select “account” from the “local type” list box.
  • Page 22 Thinker: Use Thinker’s H.323 system Suntek: Use Suntek’s H.323 system Sipphone: Free SIP service on internet, please visit www.sipphone.com for more information. Inphonex: Free SIP service on internet, please visit www.inphonex.com for more information. Fwd: Free SIP service on internet, please visit www.freeworldialup.com for more information.
  • Page 23 IP 300 User Manual “service id”. Net2phone: Please put the URI of the Net2phone server into “service addr” The default service port is 6801. Leave “service id” empty. Net2phone usually use the following servers: call1.net2phone.com; call2.net2phone.com; skip1.net2phone.com; skip2.net2phone.net. nat traversal: When the IP phone with private IP address need communicate with other IP phones in a different LAN or on Internet, please select an item from dropdown list to set the proxy used by the phone.
  • Page 24 every “nat ttl” seconds to keep the port mapping on the NAT device alive. “nat ttl” is an integer between 10 and 60, default value is 20. phone number: The local phone number or username of this phone, usually is allocated by system. account: With H323 protocol used, while calling card is set, please type the account of chosen card into this field;...
  • Page 25 IP 300 User Manual number is much more in the buffer area and the time-lapse is longer all ordingly Rtp tos: Set the TOS field of the IP header of the RTP packets. The bigger this value is, the higher priority the packet is.
  • Page 26 IP 300 User Manual normal: Call out in normal way by selecting this item. faststart: Call out in faststart way by selecting this item. advanced: Call out in faststart and tunneling way by selecting this item. It is a recommended way with H323 protocol used.
  • Page 27 Enable/disable multi-settings by selecting corresponding items from dropdown list. IP 300 IP phone allows saving 5 settings totally. disable: Disable multi-settings by selecting this item, then the phone will call out using current setting.
  • Page 28 IP 300 User Manual Note To modify the parameters of backup settings, please use Telnet commands. local prefix: With enable or switch selected in innerline dropdown list, please fill the number switching to backup setting 1 here, such as 56.

  • Page 29: Audio Settings

    IP 300 User Manual receiving forwarded calls phone number into fwd number field. fwd always: Forward all calls by checking this box. Please enter receiving forwarded calls phone number into fwd number field. fwd busy: Forward calls if busy by checking this box. Please enter receiving forwarded calls phone number into fwd number field.

  • Page 30: Other Settings

    IP 300 User Manual handset out: Drag the slider to adjust the volume of handset output. Drag it to the left to reduce the volume; while drag it to the right to increase the volume. speaker out: Drag the slider to adjust the volume of handfree output. Drag it to the left to reduce the volume;...
  • Page 31 IP 300 User Manual When debug set as 0[disable], if input ordinary password (default one is 1234), then following page will pop up after clicking be modified. Fig 3.7 Setting Page using ordinary pin with Debug set as 0 [disable] Save/Reboot: Click this button to save the configuration and the phone will reboot.
  • Page 32 IP 300 User Manual Note With H323 protocol used, if the phone dose not login Gatekeeper or Gateway; or with SIP protocol used, the phone dose not login Server Proxy, you can save IP address of other phone into phone number field.

  • Page 33: Using The Telnet To Configure The Ip Phone

    If you type super password, then you will see: Password : ******** P:\> Above information indicates that IP phone is under setting mode, Then you can set the IP 300 IP phone by using the telnet commands. IP 300 Telnet Commands Explanation IP 300 Telnet Commands Command...
  • Page 34 Usage: Display basic parameters of the IP 300 IP phone Relevant usage: None Detailed description: Display basic running parameters of the IP 300 IP phone. Input ordinary password without debug being set as 0[disable], or input super password with debug set as 0[disable], then following parameters of IP phone...
  • Page 35 IP 300 User Manual will be displayed: IP 300 V1. 38 settings Password: ******** P:\>get iptype 0[static] ip 192.168.1.100 dns 202.106.196.152 protocol 0[h323] servicetype 0[common] nattraversal2[citron] nataddwww.Showmyip.com phonenumber 6022 registerport 1719 registerttl 60 jittersize 0 calltype 0[normal] dialplan 0[disable] innerline 0[disable]...
  • Page 36 IP 300 User Manual registerport 1719 account hk016 phonenumber 6022 fwdalways 0[disable] ringtype 12[user define] password 1234 upgradeaddr [empty] sntpip 210.59.157.10 timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi] P:\> Note The “V1.38” is the version number of the firmware for IP300, it could be different from the firmware version displaying on your phone.
  • Page 37 IP 300 User Manual router is configured to use DHCP addressing, the IP phone’s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up; 2: use PPPoE mode. Those ADSL and Cable Modem users please select this item for it is a protocol especially designed for them.
  • Page 38 IP 300 User Manual IP-300 IP phone. set dns XXX.XXX.XXX.XXX With iptype set as 0, use this command to set IP address of DNS server. set dns2 XXX.XXX.XXX.XXX With iptype set as 0, use this command to set IP of backup DNS server.
  • Page 39 IP 300 User Manual huawei system; 14: use kaiman system; 15: use Ngtel system; 16: use asiainfo system; 17: use Lucent system; 18: use Harbour system 19: use IPN system; 20: use Yayng system 21: use Thinker system; 22: use Suntek system;...
  • Page 40 IP 300 User Manual protocol used according to requirement of system; 5: use this value with vida private system used; 6: aivgr use this value with aivgr private system used. set serviceaddr XXXX According to protocol used, set IP address or domain name of log in server.
  • Page 41 value with INNOPATH private system used; 4: stun. Use this value with SIP protocol used according to requirement of system; 5: use this value with vida private system used; 6: aivgr use this value with aivgr private system used; 7 Eproxy: use Eproxy system. Set nat ttl XX When IP phone sit behind a NAT device, it will send packets to server every “nat ttl”...
  • Page 42 card; while local type is set as 2[H2355 account], set password. With MGCP protocol used, please set domain name by this command. With Net2phone system used, set password of Net2phone card by this command. set registerport XXXX Set register port. According to used protocol, set as follows: With H323 protocol used, XXXX is ranged from 1024 through 6553;...
  • Page 43 IP 300 User Manual set rtpport XXXX RTP port is the port transferring and receiving voice flow using UDP protocol. XXXX is ranged from 1024 through 65535. Jitter size:X Setting RTP date stream anti-buffer size. The specific value ranges 0-32.The unit is Tone Frame number. (The value is bigger, the tone frame number is much more in the buffer area and the time-lapse is longer all ordingly.)
  • Page 44 through 3: 0: disable dial plan; 1: enable dial plan; 2: use dial number; 3: use 179XX service.;4: use hotline function. set dialnumber XX When set dialplan value set as 2, please use this command to set dial number. For example, with eTalk card used, please set it as 00. When set dialplan value set as 4, please use this command to set hotline number.
  • Page 45 IP 300 User Manual set dddprefix XX Set DDD service prefix number when set dialplan value set as 1 or 2. For example, DDD service prefix number of china is 0; DDD service prefix number of USA is 1, etc. Parameter xxx must be an Arabic numeral and no longer than 3 characters.
  • Page 46 IP 300 User Manual Set whether to use digitmap. X ranged from 0 to 1: 0: do not use digitmap; 1: use digitmap. set fwdnumber XXXXXXX Set receiving forwarded calls phone number. XXXX must be an Arabic numeral and no longer than 16 characters set fwdpoweroff X Enable/disable forward calls if power off.
  • Page 47 IP 300 User Manual set audioframes X Set audio frames in RTP package. X is Arabic numerals between 0 and set 6.3k X With G.7231, set IP-300 IP phone to use 6.3K rate or not. X is ranged from 0 through 1: 0: use 6.3K rate; 1: use 5.3K rate.
  • Page 48 IP 300 User Manual set password XXXX Set password of the IP-300 IP phone. XXX must be ASCII characters and no longer than 7 characters. set debug X Set open debugging message output grade for special tool. X is ranged from 0 through 5: 0: close debugging output;...
  • Page 49 IP 300 User Manual Usage: Load the designated settings to the current position. Relevant Usage: load 1 Command exit Syntax description: no keyword and parameter Usage: Exit from Telnet command window without saving the configuration. Relevant usage: None Command write Syntax description: No keyword and parameter Usage: Save the configuration and restart the IP-300 IP phone.
  • Page 50 IP 300 User Manual Usage: the system connects to the FTP server auto to get the corresponding file and deal with it. Relevant usage: ftp X X ranged from 0 through 2: X-0: Connect to FTP Server to get the file of updating program and save it to the SDRAM of the phone.

  • Page 51: Using The Ip Phone

    USING THE IP PHONE 1.To place a call Call another IP 300 IP phone under the same Gatekeeper: 1. Handset: Pick up the handset and listen for the Internet dial tone. Then dial the phone number you wish to call and press has been established and the ring tone has sounded, wait for the other party to answer.

  • Page 52: Receiving A Call

    IP 300 User Manual 2. Receiving a Call IP300 receives incoming calls from other IP Phones using the same service platform. The IP Phone works just like an ordinary phone for incoming calls. When it rings, just lift the handset and begin speaking.

  • Page 53: Appendixtable

    IP 300 User Manual Appendix Table IP-300 IP phone digital-character key map: Keys Press Press Twice Once Copyright @ 2005 Perfectone Net Ware Company Limited. All right reserved Press Press Thrice quartic space Case change Press quintic \ /&...

Table of Contents