Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Mistral MAAT-X7
- Page 1 Wireless Earbuds Instruction Manual Model: MAAT-X7...
-
Page 2: Safety Precautions
Safety Precautions Read all of the instruction before using this electronic device and keep this manual in a safe place for future reference. Be sure to observe the following guidelines when using your earbuds. • Listen at reasonable volumes for reasonable periods of time. •... -
Page 3: Inside The Box
To avoid damage or malfunction: • Do not expose earbuds and charging case to excessive heat. • Do not drop your earbuds and charging case. • Earbuds and charging case shall not be exposed to dripping , splashing water. • Do not allow your Earbuds and charging case to be submerged in water. - Page 4 Overview of Wireless Earbuds Charging contactor (left side) Charging socket (USB type C) Charging contactor (right side) LED indicator (Charging Case) Touch panel Charging Charging contactor contactor Sensor Eartip Microphone Left earbud Right earbud...
- Page 5 Use your Bluetooth Earbuds Charging the Case The wireless earbuds are equipped with a charging case which is not only a carrying case, but also a charging dock to charge the earbuds. When the charging case is in low battery level, please recharge the case: Connect the small type C plug of USB cable (included) into the charging socket, and large USB plug into the USB socket on computer or USB charging adaptor (not included –...
- Page 6 Bluetooth device (e.g. a mobile phone). Pair the earbuds with your Bluetooth device. Enable the Bluetooth pairing function on your Bluetooth device and search for “MAAT-X7” to pair and connect. Refer to the user manual of your Bluetooth device. Bluetooth earbuds can remember previously paired device. Simply activate the Bluetooth in your device and open the charging case.
- Page 7 Resetting If you encounter any pairing or connection issue, try the following steps to reset your earbuds. On your Bluetooth device, go to the Bluetooth menu and remove “MAAT-X7” from the device list. Turn off the Bluetooth function of your Bluetooth device. Make sure the earbuds are fully charged. Take out both earbuds from the charging case.
- Page 8 Touch Control Power On Automatically: Take out the earbuds from the charging case. Manually: Press and hold the Touch Panel for 3s. Power Off Automatically: Place the earbuds back into the charging case and close it. Manually: Press and hold the Touch Panel for 4s. Play/Pause During music playback, press Touch Panel to pause music.
-
Page 9: Care And Cleaning
Care and Cleaning Always unplug the USB charging cable before cleaning. Never spray or pour liquids directly onto the charging case and earbuds, and clean with a dry and soft towel only. Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasive cleaners. -
Page 10: Specification
Specification Power Supply: DC 5V 500mA via USB type C port Bluetooth Version: 5.0 Single Earbud Battery Capacity: 40 mAh Portable Charging case Battery Capacity: 250 mAh Support Protocol: A2DP/AVRCP/HFP/HSP/SPP/PBAP Maximum Working Range: Up to 10m* (free space) * The distance may vary and depends on the position, Bluetooth device and environment. -
Page 11: Warranty Exclusions
Warranty Conditions For Purchase In Australia Any claim under this warranty must be made within 12 months of the date of purchase of the product. To make a claim under the warranty in Australia, contact GSM Retail Group. GSM Retail Group bears reasonable, direct, expenses of claiming under the warranty in Australia. You may submit details and proof to GSM Retail Group for consideration or contact our Consumer Service phone number below. - Page 12 Cat. No. MAAT-X7 April 2021...
Need help?
Do you have a question about the MAAT-X7 and is the answer not in the manual?
Questions and answers