Page 2
Installation Component List Attention: Attention: For safety reasons and precautions, the installation of this adjustable bed must always be carried The drawings shown below are only there for reference. The finished product may be slightly out by two people at all times. Do not attempt to carry yourself. The product should always be on a different from the actual object shown.
Page 3
Step 2 Step 3 Place the bed frame face down so that you can install adjustable plastic legs. a. Connect the input power plug from the bed frame (head motor) to the power adapter shown in the picture below. (See picture for example). b.
Page 4
Step 4 Troubleshooting Turn the bed frame over in order to install the mattress retainer bar. Problem Solution Make sure all the bed frame’s power cords are properly The adjustable bed will not connected to a power source. Check to see if you are respond when using the wired using a working power outlet.