CONTENTS General Safety Remote Control Product Overview Operation Control Panel Cleaning and Maintenance Troubleshooting Specifications Customer Helpline Last Page...
GENERAL SAFETY Read this manual thoroughly before you start using the heater. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
Page 5
GENERAL SAFETY INSTRUCTIONS (Cont.) • Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains etc or insert objects into the slots available on the products. As this could result in the product temperature rising and could cause a fire. •...
Page 6
GENERAL SAFETY INSTRUCTIONS (Cont.) • Do not use the unit outdoors. It is for indoor use only. • WARNING: Do not cover! Do not cover the heater or obstruct any air inlet or outlet grilles. Obstructing these openings causes a fire hazard, reduces the operating efficiency and may lead to malfunction or damage.
Page 7
• Do not expose the appliance to high heat, sparks and open flames. • Do not pierce or burn the appliance. • Maintenance must only be carried out by properly qualified, authorised personnel. If the appliance requires maintenance or service, contact our after sales support centre click@technologist.com...
REMOTE CONTROL Using the Remote Control • Do not mix old and new batteries in the remote • Do not use different types of battery • If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
PRODUCT OVERVIEW (CONT.) CONTROL PANEL & DIGITAL DISPLAY POWER SWITCH (behind) AIR OUTLET 2 x AIR INLET AND FILTER BASE DIGITAL DISPLAY TIMER ON/OFF UP TO 9 HOURS OSCILLATION LOW/HIGH (SWING) SETTINGS INDICATOR LIGHTS...
Page 10
PRODUCT OVERVIEW (Cont.) The current-voltage of the product is 220-240V~ frequency 50/60Hz. Please check the power supply before use,make sure the socket and plug in good contact. Do not use in the vicinity of inflammable and explosive articles. Do not work in front of furniture, curtains, or other materials.
CLEANING & MAINTENANCE Cleaning Before undergoing maintenance, please disconnect the power cord plug out the power source, can be carried out after 10 minutes cooling down. 2. Clean the surface area of dust, with a soft cloth to wipe; When the surface is too dirty, make sure use warm water though below 50 degrees Celsius of the mixture of water and neutral detergent.
If none of the solutions offered help you solve your problem, please contact our support centre for advice on click@technologist.com Do not attempt to repair the appliance yourself! SPECIFICATIONS Rating...
Need help?
Do you have a question about the CTH-2300R and is the answer not in the manual?
Questions and answers