Table of Contents
Advertisement
■
Turning Power Off
Press [ON/OFF] (Power).
NOTE
• You can configure the camera so power does not turn on
when you press [
] (REC) or [
also configure the camera to turn off when you press [
(REC) or [
] (PLAY) (page 199).
Turning On Power for the First Time
The first time you load a battery into the camera, a screen
appears for configuring screen text language, date, and time
settings. Use the procedure under "Configuring Display
Language, Date, and Time Settings" (page 11) to configure
the settings correctly.
IMPORTANT!
• Failure to set the date and time will cause the wrong
date and time data to be recorded with images.
• If you make a mistake when configuring the language,
date, and time settings, you can change the settings
(pages 193, 197).
■
This camera is equipped with a sleep function and auto power
off function to conserve battery power. You can configure these
settings in the REC mode as described below.
] (PLAY). You can
]
• Sleep and Auto Power Off always operate as described below
1.
2.
44
Battery Power Conservation Features
Feature
Description
Name
The monitor screen turns off (goes
into a sleep state) if no operation is
Sleep
performed for a preset amount of
time. Press any button to turn the
monitor screen back on.
Power turns off if no operation is
Auto Power
performed for a preset amount of
Off
time.
in the PLAY mode, regardless of their current PLAY mode
settings.
– Sleep does not function in the PLAY mode.
– The Auto Power Off trigger time is always five minutes.
Press [MENU].
Use [ ] and [ ] to select the "Set Up" tab.
Settings
30 sec
1 min
2 min
Off
1 min
2 min
5 min
GETTING READY
Advertisement
Table of Contents
