Sound Effects; Call; Call Forward - Pantech C300 User Manual

Settings
turned on or off.
• Ring Volume: Controls the volume in eight levels.
• Sound: Specifies the flip open tone. You can choose from
Bell 1, Bell 2, or Bell 3.

Sound Effects

This function allows you to turn the default sound effect on
or off for various events.
Press the [Menu] Soft key, select 9.Settings, select 2.Audio,
and then select 7.Sound Effects.
Press the [Mark] Soft key, and then press [o] key to save
the effect.
• WAP Connection: When you connect or end a WAP
session.
• Minute Minder: Every minute while making a phone call.
• Call Connection: When you dial or hang up.
78
06.04.03_C300_EN_REV00.indd 78

Call

Call Settings define how your phone reacts when you
receive a call or a message, and specifies how calls are to
be answered on your phone.
Press the [Menu] Soft key, select 9.Settings, and then select
3.Call.

Call Forward

This function allows you to divert incoming calls to another
phone number.
Press the [Menu] Soft key, select 9.Settings, select 3.Call,
and then select 1.Call Forward.
Choose Forward Always, When Busy, On No Answer,
When not Found, or Cancel All, all of which divert the call
as required.
Because call forwarding is a network service, you must
contact your service provider to verify the availability of the
service.
Forward Always
This function forwards all calls without regard to the
condition. It does not even matter if the mobile phone is
switched on or off.
• Activate: Sets Call Forwarding Always.
2006.4.4 11:53:38 AM