Download Print this page

Atlas 5 Turbo Twister Slide Assembly Manual

5 ft. Turbo Twister Slide

Assembly Manual

ver.1

Table of Contents

Need help?

Do you have a question about the 5 Turbo Twister Slide and is the answer not in the manual?

Page 1 5 ft. Turbo Twister Slide Assembly Manual ver.1...
Page 2 A s s e m b l y M a n u a l f o r T u r b o T w i s t e r S l i d e Tools needed for assembly: 1/2” socket and socket wrench 1/2”...
Page 3 A s s e m b l y M a n u a l f o r T u r b o T w i s t e r S l i d e Parts: (6)- 45 Degree Elbows (1) Tube Slide Exit (6) - 45 degree Elbows Consists of (6) Bottom...
Page 4 • 1st elbow- flanges are horizontal. • 2nd elbow- spin CCW one bolt hole. • 3rd elbow- spin CCW one bolt hole. • 4th elbow- spin CCW one bolt hole. • 5th elbow- spin CCW one bolt hole. • 6th elbow- spin CCW one bolt hole.
Page 5 Page 5...
Page 6 Step #4- Position 3rd Elbow ﬂange end against 2nd Elbow overlap end so large joining ﬂanges line up. Line up ribs of 2nd and 3rd Elbows and then secure with (12) bolts, (24) wash-ers, and (12) locknuts. Step #5- Position third elbow with flange end against second elbow overlap end so large joining flanges line up.
Page 7 Page 7...
Page 8 (i.e. clockwise as opposed to counterclockwise, begin the entry angled to the left as opposed to the right). Proper installation and safety is the responsibility of the installer. Please contact Atlas Molding if any problems occur with the installa- tion. (717) 556-8193 Page 8...