Matelec FPC-12570 Manual

HYDROSTATIC PRESSURE TRANSDUCER
FPC-12570
Functional Overview
Thank you for purchasing the MATelec Hydrostatic Pressure Transducer.
This unit is designed to be used for both potable/raw/rain water and waste
water applications. The unit is suited to 4-20mA applications where precise
level readings are required.
Features
- Pressure Range: 0-1bar (0-10m)
- Small body diameter - 39mm
- Excellent repeatability and long term stability
- Excellent anti-interference ability
- Application: depth or level measurement in wells, open water
and ground water level measurement
Dimensions
39mm
93mm
Specifications
Pressure Range:
Level Range:
Overload Pressure:
Accuracy:
Supply Voltage:
Output Signals:
Temperature Ranges:
Temperature Compensation:
Electrical Connection:
Protection Classification:
Vibration:
Housing Material:
Operating Life:
MATelec reserves the right to alter any technical data without notice.
DOC: FS 12570
7.4mm
19mm 28mm
Gauge pressure: 0-1bar (0-10m)
0m-200m (site dependent)
1.5 times full scale
0.5% F.S
12~30Vdc ; 24Vdc
4~20mA
Compensated Temperature: 0~50°C
Media: -10~70°C
Environment: -30~85°C
Storage: -40~125°C
0.02%F.S./°C
Vented Cable
Sensor is IP68
20g ; 20~5000HZ
316 Stainless Steel
>1x10 8 Pressure Cycles
25mm
ATelec
®
A U S T R A L I A
REVISED: 140113