Advertisement
Instruction of the evaluation board of Micro ICR
The evaluation board should be set up with following sequence.
1. Prevent any electrical surge with earth band etc.
2. Confirm the Micro ICR is not mounted on the evaluation board.
3. DC cables of the evaluation board to be connected and to be terminated
same as Micro ICR pins (refer to "Recommended electrical circuit of Micro
ICR"). DC cable numbers correspond to pin numbers of Micro ICR
4. Follow the "Recommended power up sequence of Micro ICR"
5. Follow the "Recommended power down sequence of Micro ICR"
FUJITSU OPTICAL COMPONENTS CONFIDENTIAL
17
17
PS-15-349-01
Advertisement
