Advertisement
Available languages
Available languages
HOW TO CONNECT THE GAMEPAD
COMPUTER
1. Connect the USB into a free USB port in your device.
2. Wait until your system recognize and install the gamepad.
NINTENDO SWITCH
(BLUETOOTH)
TM
1. In the console menu choose "Controllers"
2. Choose "Change Grip/Order"
3. Press and hold gamepad "Y" and "Home" buttons until the
gamepad indicator light flashing.
4. The gamepad is connected, press "Home" button to back to Menu.
5. Choose "System Settings" and then select "Controllers and
Sensors" from the right list.
6. Switch ON "Pro Controller Wired Communication" if is Off
7. Choose "Calibrate Control Sticks" and follow the guide.
8. Choose "Calibrate Motion Controls" and follow the guide.
If the console and the gamepad enters in Sleep mode, press "Home"
button for 3 seconds with the console out the Sleep mode to
reconnect the gamepad.
Advertisement
