Instant VORTEX PLUS User Manual page 8
Hide thumbs
Also See for VORTEX PLUS:
- Quick start manual ,
- User manual (32 pages) ,
- Get started (24 pages)
Table of Contents
Advertisement
Care and Storage
DO let the appliance cool to room temperature before cleaning
or storage.
DO NOT store any materials in the appliance when not in use.
DO NOT place any combustible materials in the appliance, such as
paper, cardboard, plastic, Styrofoam or wood.
DO NOT clean the appliance with metal scouring pads or steel wool.
Pieces can break off and touch the electrical parts, causing a risk of
electric shock, burns or other personal injury.
Power Cord
A short power-supply cord is provided to reduce the hazards
resulting from grabbing, entanglement and tripping. This appliance
has a 3-prong grounding plug. To reduce the risk of electric shock:
ONLY plug the power cord into a grounded electrical outlet.
DO NOT remove ground.
DO NOT let the power cord hang over edges of tables or counters,
or touch hot surfaces or open flame, including the stovetop.
DO NOT use below-counter power outlets.
DO NOT use with extension cords, power converters or adapters,
timer switches or separate remote-control systems.
Electrical Cautions
The appliance contains electrical components that are an electrical
shock hazard. Failure to follow these instructions may result in
electric shock and/or death.
To avoid electrical shock:
To disconnect, select Cancel, then remove plug from power source.
Always unplug when not in use, as well as before adding or removing
parts or accessories, and before cleaning. To unplug, grasp the plug
and pull from the outlet. Never pull from the power cord.
6
User Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VORTEX PLUS and is the answer not in the manual?
Questions and answers
How do you remove the filter from the enclosed box it is in
To remove the filter from the Instant Vortex Plus:
1. Unplug the unit from the electrical outlet.
2. Lift the filter housing up from the top of the unit.
3. Remove the old filters and dispose of them properly (they are not recyclable).
4. Insert two new filters into the filter housing.
5. Place the filter housing back into the unit.
6. Plug the cooker back in and press the “Bake” and “Reheat” buttons together to reset the filter.
This answer is automatically generated