Advertisement
Quick Links
ENVILAR ZG102-BOX-UNIDIM
EAN: 5712716078505
Sikkerhed og advarsler/Safety & Warnings
DA:
Sluk strømmen før installation af produktet.
•
Udsæt ikke produktet for fugt.
•
Skal installeres af autoriseret el-installatør.
•
Kan monteres i el godkendte samledåser
•
EN:
DO NOT install with power applied to device.
•
DO NOT expose the device to moisture.
•
Must be installed by certified electrician.
•
Tilslutningsdiagram/Connection diagram
Produktdata/Product data
Input Voltage
Output Voltage
100-240VAC
100-240VAC
Output Current
Size(LxWxH)
1.5A max
45.5x45x20.3mm
BRADICO ApS – Fåborgvej 15A, 9220 Aalborg Øst – CVR: 39445409 – Tlf. 71 99 29 23
Belastning/Compatible Load
LED – 0-200W
•
Halogen/Incandescent lighting (glødepærer) : 0-400W
•
Egenskaber/Specifications
DA
Zigbee universal
•
lysdæmper/lysstyring baseret på
seneste ZigBee 3.0 protocol
Bagkantslysdæmper (CR)
•
Skrueterminaler til
•
ledningsfastgørelse
Styring af Tænd/Sluk, Dæmpning af
•
halogen og led lys.
Kan parres direkte med kompatible
•
Touchlink Fjernbetjeninger.
Kompatibel med universale ZigBee
•
gateway produkter.
Kan kontrolleres via 8-230V input via
•
fjedertryk (push).
Radio Frekvens : 2.4GHz
•
IP20
•
EN
ZigBee universal LED dimmer based
•
on latest ZigBee 3.0 protocol
Trailing Edge dimmer
•
Input and Output with Screw
•
Terminals.
Enables to control ON/OFF and light
•
intensity of connected dimmable
led light or led driver.
Can directly pair to a compatible
•
ZigBee remote via Touchlink .
Compatible with universal ZigBee
•
gateway products
Can be controlled by universal 8-
•
230V input single wire push switch
Radio Frequency : 2.4GHz
•
IP20
•
Advertisement
Related Manuals for ZIGBEE ENVILAR ZG102-BOX-UNIDIM
Summary of Contents for ZIGBEE ENVILAR ZG102-BOX-UNIDIM
- Page 1 • Skal installeres af autoriseret el-installatør. • Kan monteres i el godkendte samledåser • Zigbee universal ZigBee universal LED dimmer based • • DO NOT install with power applied to device. • lysdæmper/lysstyring baseret på on latest ZigBee 3.0 protocol DO NOT expose the device to moisture.
- Page 2 . modtager og kontrolleres af trådløse signaler fra kompatible Zigbee systemer. EN: This ZigBee device is a wireless receiver that communicates with a variety of DA: Tilføj lyset i interface. Forbundet lys vil blinke 5-gange og herefter lyse stabilt.
- Page 3 EN: Turn on device. Touchlink function will start automatically after 15 seconds (if device is not connected to a zigbee network) and start right away (if device is already connected to a zigbee network). 180 seconds timeout. In case of timeout repeat process.
- Page 4 EN: Adjust brightness to desired level from wall push switch or zigbee interface, then press and hold down ‘Min. Set’ key until connected light flashes. Delete the minimum brightness / Slet indstilling af minimums lysniveau DA: Juster lysstyrken til 100% via afbryder eller zigbee interface. Hold herefter ‘Min.