Summary of Contents for Jasper HZX-100
-
Page 1: Table Of Contents
HZX-100 fully automatic cutting machine Table of Contents Overview Features Technical Parameters Procedures for Operation Important Warranty Instructions for Warranty Tips for Warranty Page 1 of 9... -
Page 2: Overview
HZX-100 fully automatic cutting machine I. Overview: HZX-100 fully automatic cutting machine is a type of electrode lug cutting machine designed for the battery industry. Particularly, it is used to cut nickel bands, plated chromium bands, stainless steel bands and composite nickel bands for nickel-hydrogen and nickel-cadmium batteries. - Page 3 HZX-100 fully automatic cutting machine Cutting thickness: 0.05-0.5mm Cutting length: 1-100mm Counting range: 000000-999999 Overall weight: Approximately 50kg Dimensions: Approximately 1000mm×385mm×400mm Page 3 of 9...
- Page 4 Page 4 of 9...
-
Page 5: Procedures For Operation
HZX-100 fully automatic cutting machine IV. Procedures for Operation: Switch on power and insert air pipe. Load proper nickel bands and lock nickel sheet pan firmly on nickel sheet rack. Lead nickel band: Use tweezers to pick out nickel sheets from nickel sheet pan;... - Page 6 HZX-100 fully automatic cutting machine position. When testing the machine, never put hand or any other object on the cutting point. There is a water-filtering bottle on the air-inlet device. When the machine is running for a long time, ensure that there is no water buildup in the water-filtering bottle.
-
Page 7: Warranty
HZX-100 fully automatic cutting machine Warranty Card Customer Name: Tel: Product Name: Model & Specifications: Date of Delivery: Product No: Failure descriptions: Please stamp your purchase invoice on this page and send a copy to our After-sale Dept to establish information file. Keep the original for yourself. We promise a one-year warranty period for our product commencing on the date of delivery. -
Page 8: Instructions For Warranty
HZX-100 fully automatic cutting machine Instructions for Warranty: 1. Please refer to this User Manual before using this product and/or when encountering any failure. 2. In case of enquiry or normal maintenance, please present the Warranty Card and invoice, and contact our corresponding technicians for inquiry and maintenance. - Page 9 HZX-100 fully automatic cutting machine should be taken to protect test racks and avoid them dropping onto ground. Damage to test racks or test pencils is not deemed as mechanical failure and customers should pay for their replacements. 5. Our warranty does not cover any of the following circumstances: No Warranty Card and/or invoice are available.