Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lierda LSD4BTB-PBC1000001
Summary of Contents for Lierda LSD4BTB-PBC1000001
- Page 1 LSD4BTB-PBC1000001 User Manual Rev01 2020-12-16 User Guide...
- Page 2 File revision history Firmware Document Author Change description version revision date 201216 Initial Version...
- Page 3 1 Features An ultra-low power beacon device that supports iBeacon and Eddystone UID & URL. 2 APP communication protocol APP sends instructions to the Beacon module through the FE61 channel. After receiving the instructions, the module parses and executes the instructions, and returns the result of the instruction execution to the APP through the FE62 channel.
-
Page 4: Detailed Instructions
04 FC xx……xx Start character: all command frames must start with "01 FC", and all response frames start with "04 FC". Command ID: The IDs of commands with different functions are unique. The following is an enumeration and detailed explanation of all commands. ... - Page 5 Name: The name of the device, usually a visible string. Return: 04 FC 03 01 status Query Format: 01 FC 04 00 device Returns: 04 FC 04 len status [Name] name Set the Format: 01 FC 05 len uuid uuid len: 1-byte unsigned integer, the length of uuid, fixed at 0x10.
-
Page 6: Default Parameters
3 Default parameters Table 4 1 Module default parameter list project Default parameters Production test 115200bps serial port baud rate Broadcast Broadcast interval: 100ms parameters Broadcast data: single ibeacon broadcast, if two kinds of broadcast carousels, the switching frequency is Broadcast channel: 37, 38, 39 Scan response: switch between scan response format 1 and scan response format 2, see 5.3 for details. - Page 7 0xFE60 Lierda Bluetooth Low Energy Data Transmission Service Eigenval Data M-S 0xFE61 WN/W Command setting channel Eigenval Data S-M 0xFE62 Command setting status return channel M：Master，表示主机 N：Notify W：Write S：Slave，表示从机 R：Read WN：Write no response，不回复的写入 4.2 Broadcast settings Beacon broadcast includes three types: standard ibeacon broadcast, Eddystone UID broadcast and Eddystone URL broadcast.
- Page 8 4.2.2 Eddystone Broadcast format 4.2.3 Standard broadcast format...
- Page 9 Type is a value with a common standard. You can check the meaning of the specific number on the official website of the Bluetooth Alliance. The commonly used ones are as follows: Incomplete 16Bit service UUID (0x02), incomplete 128Bit service UUID (0x06), device full name (0x08), device abbreviation (0x09), vendor-defined data (0xFF), ···...
-
Page 10: Mode Setting
4.4 Mode setting Beacon has two modes: deployment mode and factory mode Factory mode: In this mode, the device connection does not require an authentication process. Deployment mode: After switching to this mode, the device needs to complete authentication within 10 seconds after being connected. - Page 11 Ground Reset pin RESET RESET input High level: normal operation of the module Low level: the module keeps reset SWCLK SWCLK The key pin is detected as low level at startup and enters the test P0.16 Input mode. Used to display the connection status, flashes at a frequency of P0.00 LED2 output...
- Page 12 5 Warning to users You are welcome to use the products of Lierda Technology Co., Ltd. Before using our products, please read this warning; if you have started to use the instructions, you have read and accepted this warning. Lierda Technology Co., Ltd. reserves the right of final interpretation and modification of all materials provided, and subject to change without notice.
- Page 13 FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the LSD4BTB-PBC1000001 and is the answer not in the manual?
Questions and answers