Panasonic DMC-FZ1PP Operating Instructions Manual page 56

5
1,6 2,3,4
2,3
REC1/3 SETUP
W.BALANCE
PICT.SIZE
QUALITY
SPOT MODE
SELECT SET
4
WHITE SET
FRAME THE CAMERA
AT THE WHITE SURFACE
AND PRESS SHUTTER
CANCEL
Recording images (advanced)
Here the white set mode of white balance is
explained.
[Preparation]
• Set the mode dial except for [
[ ]. (P25)
1
Press the [MENU] button.
2
Press 3/4 to select [W.BALANCE].
3
Press 2/1 to set to white set [
Only when setting the white balance again
4 Press 1.
• The message "FRAME THE CAMERA
AT THE WHITE SURFACE AND
PRESS SHUTTER" is displayed.
5
Aim the camera at a sheet of white
paper 1 or similar object so that it
completely fills the frame to white on
the screen and press the shutter
button all the way.
• White balance is set.
1600
6
Press the [MENU] button.
OFF • The menu will disappear.
EXIT
MENU
• When taking a picture with the flash after
setting the white balance manually, the
white balance may not be properly adjusted.
We recommend setting the white balance to
[AUTO] when using the flash.
MENU
56
]/[ ]/
].