Pub. 42004-245A
G A I - T R O N I C S C O R P O R A T I O N
Model 1931888-3011
Page/Party
to Radio Coupler
®
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
Introduction
The Model 1931888-3011 Coupler, when connected to a GAI-Tronics Two Channel Radio, allows a
®
GAI-Tronics Page/Party
or Call/Talk system to communicate with other Two Channel Radio hand-held
or mobile units. Radio users traveling outside the facility at a remote location or inside a plant, can
®
communicate with Page/Party
or Call/Talk users. Please see Figure 1 for installation layouts.
Figure 1. Installation Layout
Installation and Wiring
Punch or drill a hole in the left side or left bottom of the coupler and install a conduit fitting. This entry
®
is for system cable from the Page/Party
or Call/Talk system to the coupler. Sealed threaded hubs, such
as Myers Scru-Tite (1.25-inch) are recommended.
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 n 800-492-1212 n Fax: 610-775-6540