Advertisement
Remote control overview
SA-Button
SB-3 Position
SE-2 Position
S1-Pot
Left Gimbal
SYS Button
RTN Button
PAGE> Button
PAGE< Button
SD Card Slot
3.5mm
Headphone Jack
SH-Button
ZORRO is powered by 2x 3.7V 18350 Lithium Ion cells and is charged using the built-in USB-C port. The
charging circuitry is designed for charging 2x 3.7V Lithium Ion batteries only. The nominal voltage is 3.7V and
the maximum charging voltage is 4.2V.
Never charge 3.6V LiFe and 3.6V 18350 Lithium Ion packs with the onboard charger. Charging or using the
wrong battery chemistry/polarity may cause permanent damage to the PCB and in certain situations cause
fires.
Check the voltage and condition of the battery regularly and never charge the device unattended. Only charge
in safe areas away from combustable materials. Refrain from charging the radio unit if it was exposed to water
or was damaged in any way. RadioMaster does not assume any responsibility for any adverse consequences
caused by the use or misuse of this product.
Power Button
TYPE-C Charge Port
Antenna
SD-Button
SC-3 Position
SF-2 Position
S2-Pot
LCD Screen
Speaker
Right Gimbal
Lanyard Loop
MDL Button
Menu Wheel
TELE Button
USB Port
DSC Trainer Port
SG-Button
External Module Bay
2
Advertisement
