Panasonic CQ-5301U Operating Instructions Manual page 22

Installation
Cautions:
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
First complete the electrical connections, and then check them for
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Power Connector
Engage the Mounting
Springs (C) in the
mounting holes of the
Mounting Collar q
firmly.
Mounting Spring
22
CQ-5301U
(Continued)
Mounting springs (C)
Mounting
Hole
correctness.(a page 24)
Insert Mounting Collar q into the
1
dashboard, and bend the mounting tabs
out with a screwdriver.
The tabs to be bent vary depending on
the vehicle. To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.
Example:
q Mounting
Collar
Mounting Holes
Mounting Bolt
Establish the rear connection of the unit.
2
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
3
After installation reconnect the negative
(–) battery terminal.
Tab