Advertisement
Quick Links
Advertisement
Summary of Contents for Delta VIVOTEK
- Page 1 Wi-Fi Access for VIVOTEK Camera User Guide Version 1.0.0...
- Page 2 1. Introduction With a Wi-Fi dongle installed on camera, the installer can easily access the camera live view during the initial installation using a cell phone or laptop. The installer can easily check the live view for verification of view angle and position. 2.
- Page 3 1. Power on the VIVOTEK camera. 2. Install a Wi-Fi dongle to the camera using a Micro USB OTG adapter. 3. VIVOTEK’s camera will automatically configure the Wi-Fi dongle into the AP mode. 4. The Wi-Fi dongle will start broadcasting the SSID, e.g., FD9367-EHTV-v2_85C057 (mode name_last 6 digits of MAC address).
- Page 4 6. Configure your smart phone > Settings > Turn off Cellular data. 7. Connect VIVOTEK camera from your smart phone or laptop. 8. From iViewer, enter Add devices > Add from list > Select camera > Login.
- Page 5 9. You should be able to see the live streaming and perform camera view adjustment or use a laptop for further image settings. 10. Remove Wi-Fi dongle and install the top cover or access panel for waterproofing.
- Page 6 SSID can be found on the Wi-Fi device list. 5. Download or launch the Shepherd utility from VIVOTEK’s website. Find the VIVOTEK camera, and double clicks on it to open a web console. You can also manually enter its IP address on an IE or Chrome browser.
- Page 7 2.4 GHz band which ideally may reach up to 50 m or less (150 ft.) indoors and 100 m or less (300 ft.) outdoors. The actual performance varies according to devices and surrounding areas. The suggested distance between VIVOTEK camera and smart phone or laptop is less than 50 m (150 ft.).
- Page 8 VIVOTEK cameras support Internet Explorer 10 or 11 and Chrome 58.0 or above version. 8. Can I connect to VIVOTEK camera via a secure connection 443 port via supported browser? Yes, you can connect to VIVOTEK camera via secure connection 443 port via supported browser if you have already enabled HTTPS function on Camera Webpage >...
-
Page 9: Troubleshooting
For iPhone users, iViewer running on iOS 14 will not be able to search • VIVOTEK camera. Please wait for new version of iViewer release in 2021 September and add VIVOTEK camera manually with fixed IP address 192.168.1.1. If your ethernet IP address is 192.168.1.X, then please re-plug the Wi-Fi dongle again and try 172.16.1.1.