SAFETY & WARNINGS This device may not be suitable for everyone. Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference. DO NOT use this device if you fall under any one of the following conditions: •...
Page 4
• You have a history of vascular disorder (for example, the presence of varicose veins, vascular ectasia) in the areas to be treated. • You have any bleeding disorder. • You have a history of immunosuppressive disease (for example, HIV, AIDS). •...
Page 5
• Hair removal by intense pulse light (IPL) sources can cause increased hair growth in some individuals. Based upon currently available data, the highest risk groups for this response are females of Mediterranean, Middle Eastern and South Asian heritage treated on the face and neck. •...
Page 6
OVERVIEW Top view Treatment window (non-detachable basic filter) Front view LCD display Level indicators Remaining flashes left Auto mode indicator Skin sensor indicator Power button Flash button AC adapter...
Page 7
Bottom view Power connector Magnetic filter attachments Treatment window Treatment window (small filter) (large filter)
BEFORE FIRST USE 1. Soak your desired area in warm water to allow your skin to soften. Exfoliate the area with a body scrub or loofah to remove any dead skin. Apply shaving cream (not included) to the area and using the razor (included), shave the unwanted hair. 2.
OPERATION Note: For first time users, before using it on the whole body, test the device on small area of skin. If you experience adverse reactions within 30 minutes after use, stop using the device immediately. Powering and level setting 1.
Page 10
Modes This device features four modes. • Manual • Continuous • Auto • Skin rejuvenation Manual mode This mode is recommended for removing hair from smaller areas (for example, upper lip, armpit, face, bikini line). 1. Place the magnetic small filter onto the top of the device. 2.
Page 11
Continuous mode This mode is recommended for larger areas (for example, arms, legs). 1. Keep the basic filter on the device and place the magnetic large filter onto the top of the device. 2. Place the device at a 90° degree angle against your body, keeping the treatment window fully covered by your skin.
Page 12
Recommended usage The following table shows the recommended usage rate the device should be used and the progression of hair loss over time. Time frame Recommended usage Result Weeks 1–4 2–3 times a week 75% hair will naturally fall out. New hair growth will fall out and less hair Weeks 5–6 Twice a week...
CLEANING & CARE • After use, ensure the device is powered off completely. • Use a dry, dust-free cloth to clean the top of the treatment window where skin has touched and the filter on the device. • Store the device in a dry, dust-free place in an environment between -10°C–45°C with a humidity of between 10–75%.
Page 14
The hair in the hair follicle is This is a normal phenomenon and The device has a being heated. should cause no concern. strange smell when Hair residue is on the device Turn off the device and clean it in use. and causing an odour.
SPECIFICATIONS Size 155 x 60 x 34mm Net weight 200g Treatment window size 3.25cm² ⎓ Wavelength 530nm–1200nm Input 3.0A Power Number of intensity levels available Temperature: -10°C–45°C Storage conditions Humidity: 10–75%...
Page 16
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...
Need help?
Do you have a question about the ESIPLHRSKNA and is the answer not in the manual?
Questions and answers