Function Settings - Panasonic CQ-DF203U Operating Instructions Manual

Function Settings

E
N
G
L
I
S
H
21
1
Security Function
The security indicator blinks
when the removable face plate
is removed from the unit.
Default: SLED ON
Excluding Sirius from
Source Selection
CQ-DFX683U
CQ-DF583U
Default: SET OFF
Level Meter
CQ-DF203U
Default: PATTERN 1
Setting range: PATTERN 1 to 4,
OFF
36
CQ-DFX683/DF583/DF203U
2
Press and hold [SEL] Press [SEL].
for more than 2 sec-
onds.
Select
Select
(Press and hold.)
2 sec.
Select
3
Turn [VOL].
CQ-DFX683U CQ-DF583U
(Press ["] or [#] on the
remote control unit.)
(Push.)
[#]
[#] ["]
When the key in the ignition is turned
["]: Security function is active.
OFF.
≥ Security message will be displayed.
[#]: Security function is non-active.
≥ The panel removable alarm will be active.
(page 51)
When the removable face plate is re-
moved.
["]: Sirius control mode is selectable
≥ The security indicator blinks.
as a source.
(page 51)
[#]: Sirius control mode is not selec-
table as a source even if the
Sirius receiver is connected.
Pattern 4
Pattern 3
Note:
≥ For details on the "Excluding Sirius
Pattern 2
["]
from Source Selection" function, refer
to the separate operating guide for
Sirius.
Pattern 1
≥ Press [DISP] (display) to return to the
regular mode.
Pattern off
≥ If no operation takes place for more
than 7 seconds in function setting, the
display returns to the regular mode.
CQ-DFX683/DF583/DF203U
E
N
G
L
I
S
H
22
Security Function
37