Slide Show - Panasonic Palmcorder MultiCam PV-DV852 Operating Instructions Manual

MPEG4
VOICE
STILL
1
CARD MODE
PUSH
AUTO MANUAL
MENU
W.B./SHUTTER/IRIS/
VOL/JOG
1, 2, 3, 4,
1, 6, 7
5, 7
640 1280
3
640 640
4
M.SLIDE
5 6
SLIDE
40

Slide Show

The recorded still pictures in the Card can be played back like a Slide Show.
You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Your Slide Show
1
2
3
4
8
5
SEARCH
, ,
6
7
8
640
1
To Play Back All the Pictures Continuously
1280
2
After setting the [SLIDE SHOW] to [ALL], push the Operation Lever towards
[1].
≥The [SLIDE!] Indication is displayed.
≥All pictures are played back for approximately 5 seconds each, from the first
to the last recorded picture, and playback then stops.
To Pause the Slide Show
Push the Operation Lever towards [;].
≥The [(M.) SLIDE;] Indication is displayed.
To Stop the Slide Show
SLIDE
Push the Operation Lever towards [∫].
To Verify the Selected Picture
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>> [VERIFY] >> [YES].
≥Only the selected pictures are displayed in Multi-Picture Mode in the
Playback order.
To Delete the Selected Pictures
1 1 1 1
2 2 2 2
3 3 3 3
To Reset the Slide Show Setup
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>> [RESET] >> [YES] >> [YES].
≥Slide Show settings are reset.
≥For other notes, see page 63.
After setting the [STILL/MPEG4/VOICE] Switch to [STILL],
set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
≥Slide Show editing screen appears.
Set [EDIT] >> [YES].
Rotate the [PUSH] Dial to select a picture and then press the
dial.
Rotate the [PUSH] Dial to select playback order and then
press the dial.
≥This step is skipped when there are no pictures that has set for the
Slide Show.
Rotate the [PUSH] Dial to adjust the playback time and then
press the dial.
≥The Playback Order Indication
2
Indication appear.
3
≥The [¥] Indication
is displayed below pictures that have been
selected for the Slide Show.
≥To select the next picture, repeat the Steps 3 to 5 above.
Press the [MENU] Button to end the setup.
After setting [SLIDE SHOW] >> [PRESET], press the [MENU]
Button.
Push the Operation Lever towards [1].
≥The [M.SLIDE!] Indication is displayed.
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
Set [DELETE] >> [YES].
Select the picture you want to delete and press the [PUSH]
Dial.
1
and the Playback Time (Second)
4
5
6