APPENDIX
Appendix B: Output Interface Definition
Appendix C: Signal Interface Definition
A
Make sure the electromagnetic coils of the vibrator is
connected to the two output pins of the Output Power
Cable socket and the shell of the vibrator is reliably
earthed, otherwise series security incident may occur.
B
After welding, make sure the blank area is enswathed
by insulating tape or heat-shrinkable tube before insert it
into the Output Power Cable socket to avoid electrical
leakage or short-circuit.
33
3 3 S D V 3 1
w w w . b i n d e r - e s . c o m