Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Five Manuals
  4. Bicycle Accessories
  5. CDC11
  6. User manual

Five CDC11 User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
CDC11 DISPLAY
User manual
Five srl
Via Cerodolo, 4 - 40138 Bologna

Advertisement

loading

Related Manuals for Five CDC11

Summary of Contents for Five CDC11

  • Page 1 CDC11 DISPLAY User manual Five srl Via Cerodolo, 4 - 40138 Bologna...

  • Page 2: Table Of Contents

    Index Product introduction – p.2 Functions summary – p.3 Technical parameters – p.4 Dimensions – p.5 Installation instructions – p.6 Button definition – p.7 Main interface – p.8 Board terminal cable sequence schematic diagram – p.9 Frequent questions – p.9 Error codes –...
  • Page 3 1.Product Instruction CDC11 display uses the 2.4” LCD color screen features a very clear display interface, with backlight crepuscular sensor. Double side printed board, nylon buckle and ABS material shell. Good mechanical performance is ensured in a temperature range from -20° to 6°. It also features IP65 protection to water infiltration.

  • Page 4: Functions Summary

    2. Functions summary ▻ Total distance (odometer) / trip distance ▻ Maximum speed / average speed ▻ Current speed ▻ km/miles unit switch ▻ Integrated lights on/off indicator on display ▻ PAS (pedal assist system) level selection ▻ Battery residual capacity ▻...

  • Page 5: Technical Parameters

    3. Technical parameters - Voltage: 24V / 36V / 48V - Current: 24V / 35mA, 36V / 27mA, 48V / 24mA - Ambient temperature limits: -20° / +60° - Ambient humidity limits: 0-100% RH (relative humidity) - Ingress Protection: IP65 - Screen viewing angle: 160°...

  • Page 6: Dimensions

    4. Dimensions...

  • Page 7: Installation Instructions

    5. Installation instruction - Fix display and button panel on the handlebar - Adjust the angle of view in a comfortable visible position - Tighten the screws to finish the installation...

  • Page 8: Button Definition

    6. Button definition Button Operation Function hold 3S Nothing (In main interface) -> turn on/off usb charging function click (In setting function) -> confirm (In passwords interface) -> switch the passwords digit hold 3S Nothing (In main interface) -> Increase the lever (In setting interface) ->...

  • Page 9: Main Interface

    7. Main interface instructions...

  • Page 10: Board Terminal Cable Sequence Schematic Diagram

    8. Board terminal cable sequence diagram 9. Q&A Why the display is not able to start up? Check the connector between display and controller. How to deal with the error code? Ask the customer care at your local dealer.

  • Page 11: Error Codes

    10. Error codes Error code Definition Over current protection (controller) - Check whether the connectors of 3-phase power cable and the connectors are badly connected. - If the problem is still present after re-connect the connectors, there is something wrong with the controller or motor. Controller cannot properly drive the motor - Check whether the connectors of 3-phase power cable and the power supply connectors are badly connected.
  • Page 12 Thank you for your attention enjoy the ride!