en Cleaning and servicing
Screw the pump cap as far as it
4.
will go.
90°
The handle on the pump cap must
be in a vertical position.
Insert the pump cap and screw it
5.
on as far as it will go.
90°
The handle on the pump cap must
be in a vertical position.
40
Note: When inserting the base
6.
panel, ensure that, if the base
panel is protruding or the cabinet
panel is flush-mounted, the time-
Light is not visible.
Install the base panel.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the Drain programme
after you have emptied the drain
pump.
Turn on the water tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Select a suitable programme for
5.
draining.
→ "Programmes", Page 28