Advertisement
Quick Links
Advertisement
Summary of Contents for NewSound SBW01
- Page 1 Wireless charging case User manual...
- Page 2 Preface Please read this user manual carefully before use. This user manual only applies to the wireless charging hearing aid series. Function: Charging, drying, sterilization, storage Input voltage: 5V 1.5A Input current: 0.8A Output current: 7-10mA Charging time: 3-3.5 hours (A hearing aid with a capacity battery at 25mA as an example) Detection time: 5-10 seconds Sterilization time: 30 minutes...
-
Page 3: Operation
Operation 1. Connect the power a. Plug the smaller end into the charging port of the base b. Plug the larger end with the provided adaptor. c. Plug the adaptor into a power outlet. - Page 4 2. Open the charging case 3. Place the hearing instrument a. The end with dome of the instrument face and near the light for better sterilization. b. Place the instrument in each sides of the crossbar in the case.
- Page 5 4. Close the case to start charging a. The transmitting end automatically detects the hearing aid placed on the charging area of the case via Bluetooth. The detection time is 5-10 seconds. b. Once detected, the light will shine blue and system start charging. c.
- Page 6 Charging indicator recognition ① charging indicator Fully Charging charged NOTE: Due to the inconsistency of their respective residual power, there is a certain difference in the time when the indicator turn green between two device.
- Page 7 ② Sterilization indicator When all the machines placed inside the case are fully charged, the charging indicator will light green. Then turn on the UV light UV Light and start sterilization. The total sterilization time lasts 30 minutes. Fully charged NOTE: 1.
- Page 8 FCC Regulatory Information This device complies with Part 18 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
- Page 9 FCC Supplier’s Declaration of Conformity NewSound SBW01 NewSound Primo WA801 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Page 10 Xiamen NewSound Technology Co.,Ltd Address: 1st and 2nd floor, No.13 of Xiangyue Road, Torch Hi-Tech Industrial Development Zone, Xiang'An District, Xiamen, China. Email: sales@usnewsound.com...
Need help?
Do you have a question about the SBW01 and is the answer not in the manual?
Questions and answers