Advertisement
Check your package
Check the package and make sure you have everything:
Check the package and make sure you have everything:
Contents
Contents
(1) CVBXB Wall plate product (One of DVI, VGA, SVIDEO and HDSDI)
(1) CVBXB Wall plate product (One of DVI, VGA, SVIDEO and HDSDI)
(2) Power Supply adapter(12V/1.5A)
(2) Power Supply adapter(12V/1.5A)
(2) User's Guide
(2) User's Guide
If any of these items are missing in your package, contact OPHIT or
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
your supplier for support.
NOTE: Package content may differ if you have placed a special order or
placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without further notice
to a product described herein to improve reliability, design, packaging or
function.
Installation
Installation Steps:
Installation Steps:
1. Before installation please make sure product power voltage
1. Before installation please make sure product power voltage
(Do using Low or high voltage can cause either malfunction or can damage
(Do using Low or high voltage can cause either malfunction or can damage
product.)
product.)
2. Connect the signal module(DVI, VGA, SVIDEO, HDSDI) to the source device.
2. Connect the signal module(DVI, VGA, SVIDEO, HDSDI) to the source device.
3. Connect the fiber optic cable module to the optical instrument.
3. Connect the fiber optic cable module to the optical instrument.
(Note : CVBXB series be used in combine with DSL-RX.)
(Note : CVBXB series be used in combine with DSL-RX.)
4. Before installation please make sure your optical fiber cable
4. Before installation please make sure your optical fiber cable
(Multimode fiber cable(50/125um) /SC connector) .
(Multimode fiber cable(50/125um) /SC connector) .
5. Green LED indicator on the modules will be light up when connected the
5. Green LED indicator on the modules will be light up when connected the
power cable
power cable
6. Yellow LED indicator on the modules will be light up
6. Yellow LED indicator on the modules will be light up
after all connections are completed.
after all connections are completed.
7. Don't push a reset switch unnecessary when CVBXB working.
7. Don't push a reset switch unnecessary when CVBXB working.
This could cause a product stop working and malfunctioning.
This could cause a product stop working and malfunctioning.
User's Guide
Advertisement
